Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: At the "tool store"
By:Chuck
Date: 5/5/2000, 7:23 pm
In Response To: At the "tool store" (Shawn B)

: As one trapped in the "Home Depot is the world" world, I can only add that their yellow 40cent per sheet 25-packs (8 hole hook & loop), perform about five times better than the more expensive ACE hardware brand gray equivalents. I've never considered residue a problem since even a quick read of the "varnish prep" threads herein will scare even the first time newbie into vacuuming, wiping vacuuming, and wiping some more before even taking the varnish can out of the box. Is it relevant that I'm hoping to varnish in 7 days?

Cheers

Chuck/Tucson

Messages In This Thread

ROS on Stearates?
Doug -- 5/4/2000, 11:54 am
Re: All ROS discs are not created equal *Pic*
Shawn B -- 5/4/2000, 2:14 pm
Shawn, were do you buy your sanding disk?
tedley -- 5/5/2000, 2:46 pm
Re: Mail order discs
Bart Castleberry -- 5/5/2000, 8:49 pm
Klingspor
Ron Eike -- 5/6/2000, 11:11 am
Re: Klingspor
David barrett -- 5/6/2000, 11:34 am
Re: Micro-Surface
Dave Houser -- 5/6/2000, 2:19 am
At the "tool store"
Shawn B -- 5/5/2000, 4:04 pm
Re: At the "tool store"
Chuck -- 5/5/2000, 7:23 pm
Re: All ROS discs are not created equal
pete czerpak -- 5/5/2000, 9:27 am
Re: I'll second that
Tom Kurth -- 5/4/2000, 11:29 pm
HEY!!! them's the same ones I use :-)
Doug K -- 5/4/2000, 5:35 pm
Re: All ROS discs are not created equal
Doug -- 5/4/2000, 3:46 pm
Re: All ROS discs are not created equal
John B. -- 5/5/2000, 4:44 pm