Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: continuous strips?
By:Dean Trexel
Date: 5/1/2000, 10:24 am
In Response To: Re: continuous strips? (Ross Leidy)

Ross,

The strips down the center 10" or so of the boat run out in the cockpit. This made stripping with the detail strips much easier. I only had to assemble about 8' lenghts. Outside of the walnut half-strips, though, the strips had to be tortured into place.

Jay's design lends itself more to variations on straight strips. Doing some of the swoopy designs that we've seen on Guillemot and Redfish kayaks would be tough.

Dean

: Dean,

: Did you run continuous strips from fore deck to aft deck without terminating
: in the cockpit area? That does sound like torture. Is that what Jay calls
: for in the plans? I'm just curious, because the plans I've seen all have
: strips running free into the cockpit area.

: Ross

Messages In This Thread

Finally some picutures! *Pic*
Dean Trexel -- 4/30/2000, 9:36 pm
Re: Finally some picutures!
mike allen ---} -- 5/2/2000, 12:46 pm
Re: Finally some picutures!
Tig and Tink -- 5/1/2000, 1:58 am
Re: Finally some picutures!
Shawn Baker -- 5/1/2000, 1:41 am
Re: Finally some picutures!
lee -- 4/30/2000, 11:34 pm
clamps galore! *Pic*
Dean Trexel -- 4/30/2000, 11:09 pm
Re: continuous strips?
Ross Leidy -- 5/1/2000, 8:49 am
Re: continuous strips?
Dean Trexel -- 5/1/2000, 10:24 am
deck looking foreward *Pic*
Dean Trexel -- 4/30/2000, 11:01 pm
more deck detail *Pic*
Dean Trexel -- 4/30/2000, 10:56 pm
Re: more deck detail
Tig and Tink -- 5/1/2000, 2:13 am
Re: more deck detail
Dean Trexel -- 5/1/2000, 7:49 am
Re: Nice job
Ross Leidy -- 4/30/2000, 10:17 pm
Re: Nice job
Dean Trexel -- 4/30/2000, 11:27 pm
I second that!
gary b. -- 4/30/2000, 10:34 pm
Re: Finally some picutures!
Erez -- 4/30/2000, 10:06 pm
and Eric Schade's paddle *Pic*
Dean Trexel -- 4/30/2000, 9:53 pm
Re: and Eric Schade's paddle *Pic*
Dean Trexel -- 4/30/2000, 9:59 pm
hull-in-progress *Pic*
Dean Trexel -- 4/30/2000, 9:47 pm
Re: hull-in-progress *Pic*
Dean Trexel -- 4/30/2000, 9:57 pm
Re: hull-in-progress
G. Snapp -- 5/1/2000, 6:41 pm
Re: this is a T-beam strongback *Pic*
Dean Trexel -- 5/1/2000, 10:01 pm
Re: hull-in-progress
Chris Choi -- 5/1/2000, 10:50 am
Re: hull-in-progress
Dean Trexel -- 5/1/2000, 11:27 am
deck detail *Pic*
Dean Trexel -- 4/30/2000, 9:44 pm