You should be specific about the fiber/matrix ratio. Is your plot for weight% or volume%? Weight% is more useful for the builder because the correct amount of resin needed can be estimated from the weight of the cloth. However, in most situations using hand layup and light plain weave cloth - such as in strip building - excellent results can be obtained using a squeege to spread resin until the cloth texture is visible, yet the cloth is fully wet.

> It is important to have the correct mix between epoxy/polyester and glass.
> When you do a handlayupp something around 30% glass is very god. If you
> have only 10% glass you will have a heavy and weak boat (not very funny).
> Epoxy is only 10% stronger than polyester but the shape of the curve is
> the same

> %glass is from right to left and strength from bottom to top