Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Laser Alignment
By:Dean Trexel
Date: 4/6/2000, 9:42 am
Date: 4/6/2000, 9:42 am
In Response To: Re: Laser Alignment (Nick Schade - Guillemot Kayaks)
Just don't try to look thru the holes toward the laser to see if things are lining up...;-)
> One good way to use a laser for alignment is to drill a couple holes
> through each form in standard locations, then shine the laser through the
> holes. If you get the laser to shine down the full length of the boat, the
> forms are aligned.
Messages In This Thread
- aligning forms on strongback
helster -- 4/5/2000, 8:09 pm- Strings, Lasers and Stiffnesses
mike allen ---} -- 4/6/2000, 6:49 pm- Re: Laser Alignment
Nick Schade - Guillemot Kayaks -- 4/6/2000, 9:12 am- Re: Laser Alignment
Dean Trexel -- 4/6/2000, 9:42 am
- Re: aligning forms on strongback
Vaclav -- 4/5/2000, 11:10 pm- Another Strongback Idea
mike allen ---} -- 4/7/2000, 12:17 pm- Boxbeam spine
Vaclav -- 4/7/2000, 2:57 pm
- Re: aligning forms on strongback
helster -- 4/5/2000, 11:27 pm - Boxbeam spine
- Re: aligning forms on strongback
Paul G. Jacobson -- 4/5/2000, 9:35 pm - Re: Laser Alignment
- Strings, Lasers and Stiffnesses
