Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Removal of Excess Epoxy
By:Chris Casazza
Date: 3/3/2000, 7:09 am
In Response To: Removal of Excess Epoxy (Mike Brack)

Stanley and Buck make a mini block plane that has a one inch blade and is about two inches long. I found that these work very well and are very controllable for removing epoxy drips as well as other small smothing tasks. And they are relatively cheap.

Messages In This Thread

Removal of Excess Epoxy
Mike Brack -- 3/2/2000, 3:57 pm
Re: Try a flush cut saw
Will -- 3/4/2000, 9:38 pm
Re: Removal of Excess Epoxy
Paul Francy -- 3/4/2000, 12:12 pm
Re: Removal of Excess Epoxy
Chris Casazza -- 3/3/2000, 7:09 am
Re: Removal of Excess Epoxy
Paul G. Jacobson -- 3/2/2000, 4:22 pm
Chisel worked
Mike Brack -- 3/2/2000, 7:22 pm
a new record?
Paul G. Jacobson -- 3/2/2000, 8:27 pm
Re: Removal of Excess Epoxy
Tim Stough -- 3/2/2000, 4:14 pm
Re: Removal of Excess Epoxy
Ross Leidy -- 3/2/2000, 4:03 pm