Re: Cormorant 16 offsets up
By:Grant Goltz
Date: 2/23/2000, 5:40 pm
Date: 2/23/2000, 5:40 pm
In Response To: Re: Cormorant 16 offsets up (Richard Boyle)
>Is cross section data required to get the panels into the correct shape, or will
> they just assume the correct shape once they are stitched together?
> Thanks,
> Richard
Richard, If you get the max beam right and make sure the deadrise (height of chine above keel) in the center is right, the rest of the kayak should be about right. I will probably post a set of section offsets in the next few weeks for those wishing to try this as a stripper.
Grant
Messages In This Thread
- Cormorant 16 offsets up
Grant Goltz -- 2/23/2000, 12:13 am- Re: Cormorant 16 offsets up
Hank -- 2/23/2000, 11:57 am- Re: Cormorant 16 offsets up
Richard Boyle -- 2/23/2000, 11:15 am- Re: Cormorant 16 offsets up
Grant Goltz -- 2/23/2000, 5:40 pm
- Re: Cormorant 16 offsets up
pete czerpak -- 2/23/2000, 7:37 am- Re: Cormorant 16 offsets up
Grant Goltz -- 2/23/2000, 10:51 am
- Re: Cormorant 16 offsets up
- Re: Cormorant 16 offsets up