Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip cutting adventures...
By:Hank
Date: 2/8/2000, 9:11 pm
In Response To: Re: Strip cutting adventures... (Bill Light)

> I solved the "reset feather boards each time problem" by
> pivitoting the feather board to an infeed extension and attaching a bucket
> of water using a line through screw eyes to the feather board by way of
> the extended fence. The only problem happens at the end cut of the board
> but a clamp "stop" works fine there.. figure it will work even
> better with the milling of the strips..

Messages In This Thread

Strip cutting adventures...
Hank -- 2/8/2000, 11:25 am
Re: Strip cutting adventures...
Walter H. Klaus -- 2/14/2000, 8:43 am
Re: Strip cutting adventures...
Simon -- 2/9/2000, 3:09 am
Re: Strip cutting adventures...
Jerry -- 2/10/2000, 1:07 am
Re: Strip cutting adventures...
Earl Bailey -- 2/9/2000, 3:55 pm
Re: Strip cutting adventures...
Paul Lund -- 2/9/2000, 9:18 am
Re: Strip cutting adventures...
Hank -- 2/9/2000, 8:12 am
Re: Strip cutting adventures...
Spidey -- 2/9/2000, 3:30 am
Re: Strip cutting adventures...
Spidey -- 2/8/2000, 11:00 pm
Re: Strip cutting adventures...
Earl Bailey -- 2/9/2000, 3:50 pm
Re: Strip cutting adventures...
Bill Light -- 2/8/2000, 5:35 pm
Re: Strip cutting adventures...
Hank -- 2/8/2000, 9:11 pm
Re: Strip cutting adventures...
Jim McCool -- 2/8/2000, 1:55 pm