Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy question
By:Paul G. Jacobson
Date: 11/8/1999, 2:36 am
In Response To: Re: Epoxy question (erez)

> I'm not sure about wood, but I think polyester doesn't stick to glass
> (glass cloth).

Considering how many items are made with polyester resin and glass, (and have been made with these materials for many decades) this is unlikely. There is some truth in the opposite, though. Perhaps you got them reversed?

Epoxy is the best choice right now for strip built kayaks, canoes and similar boats because it works well with red cedar and redwood. It also has the desirable property of sealing the wood (one company calls this 'encapsulation') so that water and water vapor cannot penetrate and promote rot.

Polyester resin and damp wood do not make a good combination. As I understand it, the trapped moisture promotes delamination over time.

Hope this helps

Paul G. Jacobson

Messages In This Thread

Epoxy question
Larry C. -- 11/7/1999, 7:05 pm
Re: Epoxy question
Paul G. Jacobson -- 11/7/1999, 8:23 pm
Re: Epoxy question
Ian Johnston -- 11/7/1999, 9:30 pm
Re: Epoxy question
erez -- 11/7/1999, 11:44 pm
Re: Epoxy question
Paul G. Jacobson -- 11/8/1999, 2:36 am
Re: Epoxy question
Hans Friedel -- 11/8/1999, 2:28 pm
Re: polyester resin & wood
Mike Hanks -- 11/7/1999, 9:41 pm