Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Fitting Out
By:Shawn Baker
Date: 7/19/1999, 11:59 am
In Response To: Re: Fitting Out (Mike Hanks)

You know, I neglected to consider that you could just screw the screw into a piece of wax so that you'd be sure the epoxy wouldn't stick.

I just used the varnish because it was convenient and I was tired of mixing epoxy.

Shawn

> Epoxy doesn't stick to metal like it does to wood, so epoxy would work
> like the varnish only it should last a little longer. But varnish should
> be fine too.

> Mike

Messages In This Thread

Fitting Out
Paul Wild -- 7/15/1999, 8:29 pm
Re: Fitting Out
lee -- 7/23/1999, 4:48 pm
Re: Fitting Out
John Herr -- 7/16/1999, 2:58 pm
Re: Fitting Out
Shawn Baker -- 7/16/1999, 1:58 pm
Re: Fitting Out
Mike Hanks -- 7/18/1999, 3:14 am
Re: Fitting Out
Shawn Baker -- 7/19/1999, 11:59 am