Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: "A Fitting Reprise ..." Photo
By:Joe Greenley
Date: 7/17/1999, 10:47 am
In Response To: Re: "A Fitting Reprise ..." Photo (David Binger)

> I really like this idea.

> I had a thought about the underside. What if you also closed the webbing
> loop around a small circle of rope? This would give you an extra place
> under the deck to secure gear, and the rope could replace the back plate.

David,

Using rope in lieu of a backup plate should work well - however, because quite a bit of stress can be introduced to this point, and the primary function of the backup plate is to distribute these forces over a larger area, it would be wise to reinforce the area of the slots with additional glass during layup.

Messages In This Thread

"A Fitting Reprise ..." (dwg 3/10)
mike allen -- 7/15/1999, 4:31 pm
Re: "A Fitting Reprise ..." Photo
Joe Greenley -- 7/15/1999, 10:14 pm
I love it!
mike allen -- 7/16/1999, 12:31 pm
Re: "A Fitting Reprise ..." Photo
Nick Schade - Guillemot Kayaks -- 7/16/1999, 9:07 am
Re: "A Fitting Reprise ..." Photo
mike allen -- 7/16/1999, 12:36 pm
Re: "A Fitting Reprise ..." Photo
Joe Greenley -- 7/16/1999, 10:08 am
Re: "A Fitting Reprise ..." Photo
David Binger -- 7/17/1999, 9:20 am
Re: "A Fitting Reprise ..." Photo
Joe Greenley -- 7/17/1999, 10:47 am
Re: "A Fitting Reprise ..." Photo
David Binger -- 7/17/1999, 2:46 pm
Re: "A Fitting Reprise ..." Photo
Ross Leidy -- 7/16/1999, 11:16 am
Re: "A Fitting Reprise ..." Photo
Joe Greenley -- 7/16/1999, 7:32 pm
Thanks!
Ross Leidy -- 7/18/1999, 11:49 am
Re: "A Fitting Reprise ..." (dwg 3/10)
Ross Leidy -- 7/15/1999, 9:20 pm