Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: removing hotglue
By:Larry C.
Date: 3/5/1999, 5:39 pm
In Response To: Re: removing hotglue (David Sunshine)

> I am building an Osprey and put in the temporary bulkhead forms uing
> hotglue, which I now find difficult to remove. Anybody out there have any
> suggestions. Thanx

> David Sunshine

I used a soldering gun and a scraper. The type of glue you use for this purpose should be the cheap general purpose type, not the type that is used for gluing wood.

Larry C.

Messages In This Thread

Final sanding of cedar before glassing
Tom Casey -- 3/4/1999, 3:21 pm
Re: Final sanding of cedar before glassing
Nick Schade - Guillemot Kayaks -- 3/5/1999, 10:09 am
Re: Final sanding of cedar before glassing
Kenneth Paul -- 3/4/1999, 3:29 pm
Re: Final sanding of cedar before glassing
Steve -- 3/4/1999, 3:24 pm
Re: Final sanding of cedar before glassing
Robert Woodard -- 3/4/1999, 9:05 pm
Re: removing hotglue
David Sunshine -- 3/4/1999, 9:25 pm
Re: removing hotglue
Larry C. -- 3/5/1999, 5:39 pm
Re: removing hotglue
Gary Toffelmire -- 3/4/1999, 11:53 pm
Re: removing hotglue
Robert S -- 3/4/1999, 9:43 pm
Re: removing hotglue
ray jenkins -- 3/4/1999, 9:43 pm