Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Raka Epoxies
By:Rick S.
Date: 3/4/1999, 11:30 am
In Response To: Raka Epoxies (Chris C.)

> This has probably been asked and answered before on this board but has
> anyone had any experience with Raka Epoxies and if so what do you think.
> Also If I am going to glass the inside of my chesapeake 17, should I tape
> the seams first also. If not, should I glass the inside while the fillets
> are still uncured. Thanks.

I used RAKA's no blush epoxy on my Great Auk. It was the first time I used epoxy and fiberglass and had no problems at all.

Rick S.

Messages In This Thread

Raka Epoxies
Chris C. -- 3/4/1999, 7:39 am
Re: Raka Epoxies
Stan Heeres -- 3/4/1999, 12:32 pm
Re: Raka Epoxies
Robert S -- 3/4/1999, 9:52 pm
Re: Raka Epoxies
Stan Heeres -- 3/4/1999, 10:56 pm
Re: Raka Epoxies
Roger Donahe -- 3/5/1999, 10:25 am
Re: Raka Epoxies
Stan Heeres -- 3/5/1999, 12:09 pm
Re: Raka Epoxies
Shawn Baker -- 3/4/1999, 12:41 pm
Re: Raka Epoxies
Stan Heeres -- 3/4/1999, 11:00 pm
Fisheyes
Pete Rudie -- 3/4/1999, 11:51 pm
Re: Raka Epoxies
Don Beale -- 3/4/1999, 12:16 pm
Re: Raka Epoxies
Rick S. -- 3/4/1999, 11:30 am
Re: Raka Epoxies
Stan Heeres -- 3/4/1999, 12:33 pm
Re: Raka Epoxies
Rick S. -- 3/4/1999, 2:26 pm
Re: Raka Epoxies
Rick S. -- 3/4/1999, 3:33 pm
Re: Raka Epoxies/Glassing Inside?
Shawn Baker -- 3/4/1999, 10:37 am
Re: Raka Epoxies
Jay Babina -- 3/4/1999, 9:15 am