I am at the stage in building my first Strip Built boat where I will be moving on to final sanding of the hull prior to the initial coat of epoxy. At which grit do you folks stop when sanding the bare Cedar Hull? I have just about finished the fairing of the hull with my ROS and 50 Grit.
I stop at 120 but then I start at 80 so I never have big sanding marks. I rather spend more time sanding and have more control.
120 for me too
I did one boat with 100 grit. I would add that the finer the grit, the lighter in color the wood will wet out. But usually 120.
120 it is. Thank you for…
120 it is. Thank you for the help