<> Restoring the VJ | Kayak Forum

Restoring the VJ

Submitted by Pruden17 on Thu, 05/02/2019 - 21:59

Well, I must be getting old...the VJ, my Waters Dancing S&G Lightning 17, has a delamination issue at the underside of the cockpit deck. The brass strip on the keel is loose. Seat supports are broken. A couple of chines are ground down by a couple of millimeters...Shyte...this sounds like my body feels.

I started sanding her down to the epoxy last week...I'll be on it all day tomorrow to remove the old varnish and get it down to where I can expose all damage and start the repairs. Some of you might remember that I built a permanent camera holder under the deck. I've cut that out (thank you Sawzall) and I have a replacement that is not only longer to fit my big lens but will be removable (slide into built-in slots). I will repaint her using automotive paint and do some artsy stuff using metal flake. In the meantime, I'll be paddling my S&G Night Heron. It's a good life.

Looks like a good project, I am sure you will have plenty of good memories as you work on it.  Good hearing from you.

 

...what’s really good is not being on Facebook. Too much mid/dis information there. It’s good to be back to the real world...this site. 😃

I patched up a few spots in the cockpit where wear-and-tear was showing, including the area that dominates a little. Got the brass keel strips reglued as well. Found a couple of unwanted bulges in the previous Kevlar layout so I sanded them level and put patches of glass there, too. Tomorrow I'll start building the removable camera holder slots...the compartment itself is already built. 

The sanded boat
The sanded kayak

It is very unfortunate that this site has become much less active since the advent of facebook groups. I remember being concerned about it at the time, because FB has no useful archiving system for people to search, and the same old questions come up again and again, and sometimes the blind end up leading the blind because folks with the useful information start finding it a chore to repeat themselves all the time.

I suppose is was inevitable but, personally, I think it is a bit of a tragedy that activity on this forum has diminished so much. John Abercrombie seems, more or less, to be holding the fort all by himself.

For a couple of decades I used to log on every day to see what was going on, and often share, and sometimes over-share. This forum was part of my daily ritual. These days I might drop in once a week or so, without expecting much movement. It feels like the end of an era, and I feel nostalgic about it.

The only way I can think of reinvigorating this forum is for us to promote it on FB, by suggesting people look for solutions here in the database and ask their questions here, but that is an extra click away, and research seems to have become an idle pursuit, demanding instant response, even if the information is sometimes suspect.

That is progress, I guess, but if it is not too much of a chore to maintain it, this is still a useful resource, and could become more active again, if enough of the new crop of builders get fed up with the transient nature of FB interactions and can find their way here. I shall continue checking in.

Et

100% agreement with everything you said Etienne.  For the last few months I have felt like I should be turning out the lights when I sign off the forum :(

Unfortunately, I have "O" interest in Facebook, don't even want to be in the neighborhood so someone else will have to promote us there .  .  .  .  

Several months ago someone wrote that they hated to see the forum disappear due to lack of activity. I reassured them that that would never happen to this great forum .  .  .  now, not so sure.

I have read many opinions in other sources lately decrying the lack of good kayaking information available and that what is available is inaccurate, unhelpful or unsafe and many are getting tired of trying to provide correct information, as you stated, over and over again. 

The future does not look good here :(

JohnAbercrombie

Fri, 06/07/2019 - 12:46

I'm a 'NEVER, EVER,EVER!!' person about Facebook.

I won't deal with it, won't join, and wish Facebook the worst, now and in the future.

So perhaps it's not surprising that I still check in here often.

There may be less amateur kayak building going on? The designers who sell plans and companies who sell kits could tell us, I suppose.

Many forums seem to be dying - seakayak forum is gone AFAIK, this forum is less and less active (not helped by the change in software here), and even WestCoastPaddler is noticeably quieter nowadays.

 

I will never join anything like Facebook again. This forum is far far more informative, personal, and welcoming. Facebook is nothing more than a capitalistic, opportunistic, narcistic, propagandizing place where sheep congregate to find ways to think according to their influences. It was originally interesting enough...but not now. Now, I gotta story to post.

Snowbound

Mon, 06/10/2019 - 09:14

In reply to by JohnAbercrombie

I just came to kayak building 18 months ago. I also wish the group was more active, but part of the problem is that in almost all cases you can find the information you need without having to ask questions. With searching of forum archives, blogs and videos there's not too much you can't figure out.

Way back I liked Facebook for keeping up with friends, family and events going on around town,  now it's mostly ads, political rants, cat videos and memes.

By the images I post, you can see that I have a long lens to accommodate. It's length is 2 inches longer than the camera with mounted lens. It will slide into slots and be removable. The first one I created was not removable and caused my partner, Shannon, to scrape her shins on it. The new one can be removed or shoved further back into the cockpit to accommodate longer legs than my short little chicken legs, or cute little legs, as Shannon laughingly calls then. Oddly, these cute little chicken legs were the 8th faster little legs in Alberta for the 5 mile cross-country championships back in their heyday. Anyway, back to the camera holder. The shape of the holder was decided by the angles of the camera with lens attached. The shape is pentagonal, the length, as I said, is longer than most men's lenses. The hanging supports were angled according to the deck angles of the VJ. The images tell the story as to how I set them. Tomorrow, I hope to glue I to place the slots. I'll post pics of that once done. Shannon doesn't appreciate how my newly cut mop sticks out in all directions...I think the epoxy I got onto and into it should help it look more tamed. You've seen the movie There's Something About Mary....well, there's something about Rob...it's epoxy, great, nicely permanent hair goo. 

Robert (Glue i)N (his hair) Pruden

Supports taped into place

 

I got the guides glued to the top edges of the camera compartment today, also put a seal coat on the slot pieces. Tomorrow I'll glue the slot pieces into place. 

Slot guides glued into place

 

I got the slots to hold the camera holder glued into place. The camera holder sits well in the slots and slides all the way into the back of the cockpit. Now when I climb aboard the camera holder doesn't scrape my shins and I can forego having there at all. I'm pretty happy with the install. I'll smooth out any rough spots when I start doing the finishing g work on the VJ. Incidentally, I used -8 - -15℃ Swix Ski wax on the camera holder glides to keep them from being glued to the slots. The wax does help lubricate the guides while sliding the holder in and out of the slots

Slots installed

 

 

The camera holder now slides back 12"'s further than the old permanent position. During expedition kayaking, I usually stow a medium sized Pelican case containing electronics  behind the camera holder, I can still do that.Rear Position

The best way to get folks back here is to keep posting stuff as if they were still here and reading. I do feel a little guilt for turning to Facebook, I connected to a lot of family there and it was tedious to duplicate posts. I think I made a mistake by using Facebook but never have I erred by posting here at this site. 

Over the next year or two I will have enough projects going to keep posting useful, interesting, and even informative stuff. Once my canoe reno is complete (a week) and the VJ is done (end of July), I'll start on a Waters Dancing S&G canoe (beautiful to look at when done) complete with a retractable keel (maybe), a removable mast and sail, a removable rudder, and built-in beer/wine glass holders, maybe a place to lean back and chill out on the floor. 

Hopefully these activities will help drawn folks back. Of course, I'll keep being me and inject my personality into my posts...in the past I have been told that this is a good thing.

I made up a batch of epoxy thickened with wood flour to a peanut butter consistency and put fillets along the outside of the rails of the camera holder. These fillets will give the rails significant strength without affecting how the rails work.

Fillets

 

Etienne Muller

Sat, 06/15/2019 - 04:20

Rob, I think I am speaking for all of our circle, when I say that you are sorely missed on Facebook.

There was a stats function on the old iteration of this forum, and I do believe that my POLEDANCER thread was statistically the most active thread in its entire history. I take huge pride in that.

I agree, we should keep posting new projects. I would be at the moment, but my current project is a sailing boat, not a kayak, so I am not sure it would be appropriate. Also, with the old site one could hotlink images from one's own website, so space was not being taken up on Nick's server. On the other hand, the hotlinking would have been  doubling the data throughput, which historically might have been an issue. The old stats confirmed that posts flagged as containing images were viewed many, many more times than those containing only text. So a picture obviously does paint a thousand words. I loved the format of the old forum. It was so easy to follow contexts within a thread. I think we lost quite a few members when the format changed. No fault, of Nick's. The technology became unsupported. That is progress... 😡

Anyway, it is nice to see you back in the fray, and I, for one, will continue checking in, and contributing, if I have something interesting or useful to share.

Et.

Etienne,

I have viewed your quality work for a long time. I am not going to build a sailing boat and I suspect many here are not either but . . . there is much to be learned from your techniques used to reach a goal. Following your 'problem solving' process is very educational to me. Unfortunately, I am not willing to join Facebook to view your wonderful work, (I have to draw the line somewhere) but I would love to have access to watch your progress if there is any way - - especially photo's :)

Thank you,

President of your fan club :)

Hi Randy. This link should get you to my current project. I find it handy to keep the log in a FB gallery while the project is ongoing, Then once it is finished I weed out a lot of the photos and do up a proper gallery on my own website. For people who want to watch the progress in real time though, this is the link.

Et

https://www.facebook.com/media/set/?set=a.2263337930393674&type=3

Amazingly beautiful work Etienne, you are becomeing a master of your craft - no punn intended.

Thank you very much for the link. I do have to admit one thing though, everytime I see photo's of your work area I feel I should be coming over there for a week or two and tearing out a couple walls and adding 12'-15' to it just so you will be able to turn around :)

Thanks again,

Randy

Yes. There is never enough room. If I did it again, there would be a small house with a big workshop.

new to building and paddling.  like this forum and hope it can get more activity.  i come from the R/C model boat world and the biggest forum for it has gone away too and as unfortunate as it may be that community mostly communicates on FB now.

i will post about my upcoming projects here in the future, but i have struggled to find any good groups on fb that are kayak building related, so a point in the right direction would be appreciated. 

are there any good resources for calendar of events? such as gatherings or festivals?

I have been sanding off the graphite/hexaboron nitride anti abrasion coating from the bottom of the VJ. I'm using 60-grit on my Dewalt ROS, it's slow going...very slow going...proof that both work to protect the bottom of the kayak. Going to try 40-grit tomorrow. I could have left the coating on the hull but, after 10-years, I think it's wise, very wise to remove it and look for damage...already found a few minor issues. Once I'm done this part of the restoration, I'll go over everything with a fine tooth comb and make certain my t's are dotted and my eyes crossed before starting any finishing work. I still need to prep the hatch openings for the magnets...that will take some doing but I have everything I need and know what route I'll take to get it done.

Big Job

 

I was using a cheap brand of 60-grit paper to sand off the anti scratch coating...each piece lasted 10-15 minutes before I needed to change it up to a new one. Got frustrated because the job was taking too long so I bought a few 40-grit disks made with zirconium...each piece lasted 2 -hours and were still usable...just slowed down a touch in digging through the coating so I changed them up to keep the ball rolling. If I can find finer zirconium based disks, I'll make them my preferred choice for sanding. The image below shows the packaging for those of you who are interested. Norton

I'm impressed at your perseverance, Robert.

When I refurbished my Petrel, after a too-close encounter with some stone steps and a big wave in Venice, I gave up and stripped the fibreglass off using a heatgun. It was also finished with an anti-abrasive, and sanding was ridiculous.

Keep the pictures coming, please!

After many days of sanding, the hull is sanded down to the glass (and maybe some wood). I moved to converting my strap down hatches to magnetic hold downs. Man, lots of work to do the conversion...I hate undoing my work because I usually build something to last forever. The first step was to use the hatches as a template to draw the wider opening around the old deck openings into which the hatches will fit. Then I used my trusty Bosch jig saw to remove the excess material, then sand the edges of the new opening such that I had good shape and about 1/8" extra width, then create new pieces of wood for under-deck magnet/hatch supports and spacers, then sand to smooth and shape them, then glass over the magnets as necessary (as per Rob Mack's video). Then I created a support to hold the 1/2" magnets to the underside of the hatch, fitted these supports to the lower magnetic support, then drilled 1/2" holes where the magnets would be set. I used 10 magnets on the hatch and ten on the lower support. In hindsight, I should have used more because the magnetic grip is not quite strong enough but I will correct that later. The hatch had a perpendicular support on the underside which ran the length of the hatch along the seam (two halves) and was about 1.5" wide: this had to be removed because the hatch was not sitting flush with the lower support lip of the top of the deck: it was a wee bit warped. I used a dremmel fitted with a side-cutting bit to dig through the fillets and glass holding it in place to remove it, then used a metal straight edge and utility knife to carefully cut through the epoxied seam from the top of the hatch until slight pressure caused it to cleanly break apart. The edges of the seam were then sanded flat. I sanded all residual fillet and glass from the underside of the seam, then carefully fitted the hatch halves into place, sanded off anything that prevented the hatch from laying flat and presto, I got a magnetic hatch that fits perfectly and flush with the top of the deck. I finished up today's efforts by setting the hatch halves in place, ensuring that the center-line of the two hatch halves were in line with the seam on the deck, made sure there was no magnetic resistance causing the hatch halves to want to change position, then I wetted out the edges with

Tracing
Tracing out the new wider deck opening

epoxy, then whipped up some thickened epoxy using wood flour to fill the hatch seam as much as possible. Once that seam is cured enough, I will remove the hatch and fillet and glass the seam from the underside to give it decent strength. Knowing me I'll unthinkingly place my fat butt on it one day and risk cracking it apart. The images below show some of the process I went though. Next job is to do other hatch.