Looking for Suggestions on Epoxy

Submitted byajit onMon, 06/01/2020 - 23:29

Hello,

I am planning to build my first S&G plywood kayak. I am looking for an advice on Epoxy. What kind of Epoxy will I need and how much quality do I need to buy?

Thank you,

Ajit

John VanBuren

Tue, 06/02/2020 - 07:10

In my experience, you will need about 1.5 gallons of epoxy.

I like System Three Silvertip for a clear finish. It cures very clear.

But if I were going to paint a boat for the final finish, I would use RAKA with the Blush free hardener to save a few dollars.

I hope this helps,

John VB

I agree with John, I find Raka with UV inhibitor to be very clear also.  If you want clear it is not just the epoxy, the finish is maybe a bigger issue than the epoxy.  Two part finishes are generally more clear and amber less over time.  I used to use System three as my epoxy and epifanes as my finish.   I  switched to Raka with UV inhibitor and automotive clear coat about 6 years ago and have been very happy with the change.

 

I spray the clearcoat, that is one reason you really need to make sure to follow the safety instructions.  I really doubt you could brush on a clearcoat it just is not formulated to do that.

Fabulous, article. I have never seen this type of article before. The author describes the structure of the article as well as explain all important points related to the topic.

Call Girls in Bangalore
Escorts in Bangalore
Bangalore Escorts
Bangalore Escorts Service                       
Bangalore Call Girls

Escorts in Bangalore

Bangalore Escorts Service