Sea Kayaks Techniques Bulletin Board

Re: Check shaft oval!!

Posted By: Randy Knauff
Date: Wednesday, 6 August 2003, at 12:09 p.m.

In Response To: Re: Check shaft oval!! (Rob Enns)

: Randy
: Excellent point about the oval. I cut the Werner down last night and just
: caught that factor at the last minute. My 235 was cut down by the factory
: from a 240 as I thought that was what I needed. I was able to cut it down
: to a 228, and do not think it could have gone farther, so 12 cm seems
: about the limit. How do you cut down the other side,-from where the shaft
: attaches to the paddle?? Get a new insert??

The other paddles I cut down were one piece and I had some inserts to use with the new two piece length.
Not sure how one would get the insert loose to reposition/glue it on a Werner. If they are glued, a heat gun? If fiberglassed, drill out and replace?
The paddle I had to "oval" is in Arizona right now. When I get back down there, I will try to remove the insert some way and see if I can do it without ruining the shaft.
If you find something that works, let me know.
Randy

Messages In This Thread

paddle length- old dog learning
Rob Enns -- Tuesday, 5 August 2003, at 11:30 a.m.

Re: paddle length- old dog learning
Shawn Baker -- Tuesday, 5 August 2003, at 12:31 p.m.

Re: paddle length- old dog learning
risto -- Tuesday, 5 August 2003, at 12:45 p.m.

Re: paddle length- old dog learning
Shawn Baker -- Tuesday, 5 August 2003, at 1:09 p.m.

But ...
risto -- Thursday, 7 August 2003, at 5:10 a.m.

Re: But ...
Shawn Baker -- Thursday, 7 August 2003, at 12:06 p.m.

Re: But ...
Brian Nystrom -- Friday, 8 August 2003, at 12:25 p.m.

Re: paddle length- old dog learning
Rob Enns -- Tuesday, 5 August 2003, at 1:01 p.m.

Re: paddle length- old dog learning
Karl -- Tuesday, 5 August 2003, at 12:45 p.m.

Re: beam and paddle length
martin -- Tuesday, 5 August 2003, at 3:22 p.m.

Re: paddle length- changing "gears"
Brad Farr -- Tuesday, 5 August 2003, at 7:00 p.m.

Re: paddle length- changing "gears"
KenB -- Tuesday, 5 August 2003, at 10:21 p.m.

Re: paddle length- changing "gears"
risto -- Thursday, 7 August 2003, at 5:13 a.m.

Re: paddle length- changing "gears"
KenB -- Thursday, 7 August 2003, at 11:28 a.m.

Re: paddle length- changing "gears"
risto -- Wednesday, 13 August 2003, at 12:53 p.m.

Fixing a loose button
Brian Nystrom -- Wednesday, 13 August 2003, at 1:40 p.m.

changing "gears"! , feather?
Peter K -- Wednesday, 13 August 2003, at 11:00 p.m.

Re: paddle length- changing "gears"
Greg Stamer -- Thursday, 7 August 2003, at 12:51 a.m.

Re: old dog learning about hills in Iowa
Bryan -- Wednesday, 6 August 2003, at 12:07 a.m.

It's A Lever......
Ian Johnston -- Wednesday, 6 August 2003, at 2:27 a.m.

Re: paddle length- old dog learning
Don -- Tuesday, 5 August 2003, at 5:43 p.m.

Check shaft oval!!
Randy Knauff -- Tuesday, 5 August 2003, at 8:30 p.m.

Re: Check shaft oval!!
Rob Enns -- Wednesday, 6 August 2003, at 11:16 a.m.

Re: Check shaft oval!!
Randy Knauff -- Wednesday, 6 August 2003, at 12:09 p.m.

Re: Check shaft oval!!
Shawn Baker -- Wednesday, 6 August 2003, at 1:24 p.m.

Sea Kayaks Techniques Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.