Sea Kayaks Techniques Bulletin Board

Re: paddle length- old dog learning

Posted By: Rob Enns
Date: Tuesday, 5 August 2003, at 1:01 p.m.

In Response To: Re: paddle length- old dog learning (Shawn Baker)

: Fine-toothed hacksaw. Clean up with fine sandpaper. Go for it!

: Shawn

I actually used an electric chop saw on the spare paddle to cut it down. It made a very square fine cut, and was very easy to do. Centering the hole for the latch button was a little trickier!
Rob

Messages In This Thread

paddle length- old dog learning
Rob Enns -- Tuesday, 5 August 2003, at 11:30 a.m.

Re: paddle length- old dog learning
Shawn Baker -- Tuesday, 5 August 2003, at 12:31 p.m.

Re: paddle length- old dog learning
risto -- Tuesday, 5 August 2003, at 12:45 p.m.

Re: paddle length- old dog learning
Shawn Baker -- Tuesday, 5 August 2003, at 1:09 p.m.

But ...
risto -- Thursday, 7 August 2003, at 5:10 a.m.

Re: But ...
Shawn Baker -- Thursday, 7 August 2003, at 12:06 p.m.

Re: But ...
Brian Nystrom -- Friday, 8 August 2003, at 12:25 p.m.

Re: paddle length- old dog learning
Rob Enns -- Tuesday, 5 August 2003, at 1:01 p.m.

Re: paddle length- old dog learning
Karl -- Tuesday, 5 August 2003, at 12:45 p.m.

Re: beam and paddle length
martin -- Tuesday, 5 August 2003, at 3:22 p.m.

Re: paddle length- changing "gears"
Brad Farr -- Tuesday, 5 August 2003, at 7:00 p.m.

Re: paddle length- changing "gears"
KenB -- Tuesday, 5 August 2003, at 10:21 p.m.

Re: paddle length- changing "gears"
risto -- Thursday, 7 August 2003, at 5:13 a.m.

Re: paddle length- changing "gears"
KenB -- Thursday, 7 August 2003, at 11:28 a.m.

Re: paddle length- changing "gears"
risto -- Wednesday, 13 August 2003, at 12:53 p.m.

Fixing a loose button
Brian Nystrom -- Wednesday, 13 August 2003, at 1:40 p.m.

changing "gears"! , feather?
Peter K -- Wednesday, 13 August 2003, at 11:00 p.m.

Re: paddle length- changing "gears"
Greg Stamer -- Thursday, 7 August 2003, at 12:51 a.m.

Re: old dog learning about hills in Iowa
Bryan -- Wednesday, 6 August 2003, at 12:07 a.m.

It's A Lever......
Ian Johnston -- Wednesday, 6 August 2003, at 2:27 a.m.

Re: paddle length- old dog learning
Don -- Tuesday, 5 August 2003, at 5:43 p.m.

Check shaft oval!!
Randy Knauff -- Tuesday, 5 August 2003, at 8:30 p.m.

Re: Check shaft oval!!
Rob Enns -- Wednesday, 6 August 2003, at 11:16 a.m.

Re: Check shaft oval!!
Randy Knauff -- Wednesday, 6 August 2003, at 12:09 p.m.

Re: Check shaft oval!!
Shawn Baker -- Wednesday, 6 August 2003, at 1:24 p.m.

Sea Kayaks Techniques Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.