| |
Sea Kayaks Techniques Bulletin Board
Re: Current Draw 500 vs. 625
Posted By: Brianne Corbett In Response To: Current Draw 500 vs. 625 (Rick Allnutt)
Date: Tuesday, 26 November 2002, at 7:36 p.m.
: SNIP: My Arluk will only fit the 500gph pump because of space restrictions. I
: use: Thanks Ian,
: I looked and looked for the current draw for the 500. 2.4 amps... I did find
: the draw on the 625 which had been claimed as more efficient. It is 1.2
: amps. Seems that if one were choosing one vs the other for a new
: installation, the 625 would be the better choice.The 625 is good... better than the 500... but the 1250 is a lot better... twice as good to be precise. The difference in size is minimal but you get double the flow. I have already shown how you can run on a single amp 12V battery with no problem.
: How does the priming work? Do they have to be underwater to begin to work, or
: will they suck up a little on the bottom of the boat along with a lot of
: air??Don't worry about the priming. The Attwoods will suck air and still pump. The impeller is very close to the bottom and it sends the liquid spiraling out to the hose... there is actually no suction hose leading to the impeller... only the exit hose.
It doesn't seem to mind running dry for a little while. It starts to whirr and you switch it off. Simple as can be.
Safe Paddling!
Brianne
| |
Sea Kayaks Techniques Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.
|
Kayaking Technique |