Kayak and Canoe Design Bulletin Board

quick cad

Posted By: Jamin
Date: Friday, 19 February 1999, at 7:17 p.m.

In Response To: Re: Computer assisted design (John Fereira)

> I was hoping for an easier way where I would
> only have to enter the X/Y coordinates once.

if you use the "A" (absolute x-y) command you can type in the coordinates directly into Quick CAD. I set it to draw then marker then point then i had to change the size of the point to .1" and just entered the numbers in the order they were in Nick's book. Then I connected the points in order on the drawing. (I also changed the marker to a closed circle) This was my first attempt to use a CAD program so the stuff I did was basic.

If you have any questions Email me firestarter@skyenet.net

Messages In This Thread

Computer assisted design
John Fereira -- Monday, 15 February 1999, at 3:02 p.m.

Re: Computer assisted design
Alan Resinger -- Wednesday, 17 February 1999, at 9:00 p.m.

Re: Computer assisted design
John Fereira -- Friday, 19 February 1999, at 2:55 p.m.

quick cad
Jamin -- Friday, 19 February 1999, at 7:17 p.m.

Re: quick cad
Nick Schade -- Monday, 22 February 1999, at 10:25 a.m.

Re: Computer assisted design
Pete Rudie -- Wednesday, 24 February 1999, at 5:08 p.m.

Re: Computer assisted design
Nick Schade -- Thursday, 18 February 1999, at 12:39 p.m.

Kayak and Canoe Design Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.