: Hard to pour the epoxy I'd suspect anyway 1/2 way down the length of the
: boat, thickened with anything I'd think would make it more difficult to
: pour.
: Like I said, I don't do it that way, I use internal stems that are gooped
: into place with very heavily thickened epoxy putty. I use just enough
: epoxy to keep the mixture stuck together, so it's pretty light and I do
: this well before the deck is added, much easier without the deck in the
: way 
: Bill H.
Hi Bill et al,
I'm wondering about this end-pour idea. Why pour? Why not do it when the deck is off?
That would allow you to set anything you want in the way of toggle mounting.
Mike Savage
South West Cork
