Kayak Building Bulletin Board

Re: Urethane Safety Issues

Posted By: Bill Hamm
Date: Monday, 5 May 2008, at 2:10 a.m.

In Response To: Re: Urethane Safety Issues (Roy)

: SNIP

: So how does one know if the

: SNIP

: Ted

: Which number 3 M cartridge did You find to specifically mention the
: isocyanates?

: Best Wishes
: Roy

There are no cartridges that are designed specifically for isocyanates. Not going to be one either. Cartridges don't take it out of the air, that's why a supplied air respirator is required.

If you're putting this stuff on without spraying it, you need a general organic cartridge to remove any traces in the air. And you need a fair amount of ventilation, don't even think about doing this in a closed room.

Bill H.

Messages In This Thread

Material: hBN Coating Abrasion Test *LINK*
Dan Caouette (CSFW) -- Tuesday, 29 April 2008, at 8:25 a.m.

Test Link *LINK*
Dan Caouette (CSFW) -- Tuesday, 29 April 2008, at 8:27 a.m.

Re: Test Link
Dave Reekie -- Tuesday, 29 April 2008, at 1:14 p.m.

question
LeeG -- Wednesday, 14 May 2008, at 12:48 p.m.

Re: question------WebKitFormBoundaryaMY9uSPYUF94+D
Dan Caouette (CSFW)------WebKitFormBoundaryaMY9uSP -- Wednesday, 14 May 2008, at 3:17 p.m.

Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- Tuesday, 29 April 2008, at 9:44 a.m.

Re: Material: hBN Coating Abrasion Test
Bill Hamm -- Wednesday, 30 April 2008, at 1:07 a.m.

Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- Wednesday, 30 April 2008, at 8:58 a.m.

Re: Material: hBN Coating Abrasion Test
Bill Hamm -- Thursday, 1 May 2008, at 1:21 a.m.

Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 9:40 a.m.

Re: Material: hBN Coating Abrasion Test
Acors -- Friday, 9 May 2008, at 6:01 p.m.

Urethane Safety Issues
Ted Henry -- Tuesday, 29 April 2008, at 4:57 p.m.

Re: Urethane Safety Issues
Steve Rasmussen -- Tuesday, 29 April 2008, at 5:21 p.m.

Re: Urethane Safety Issues
Steve Rasmussen -- Tuesday, 29 April 2008, at 7:50 p.m.

Re: Urethane Safety Issues
Ted Henry -- Tuesday, 29 April 2008, at 9:11 p.m.

Re: Urethane Safety Issues
Steve Rasmussen -- Tuesday, 29 April 2008, at 9:37 p.m.

Re: Urethane Safety Issues
Bill Hamm -- Wednesday, 30 April 2008, at 1:14 a.m.

Re: Urethane Safety Issues
Bill Hamm -- Wednesday, 30 April 2008, at 1:11 a.m.

Re: Urethane Safety Issues
Steve Rasmussen -- Wednesday, 30 April 2008, at 9:32 a.m.

Re: Urethane Safety Issues
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:02 a.m.

Re: Urethane Safety Issues Part 1
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:03 a.m.

Part II
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:04 a.m.

Part III
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:06 a.m.

Re: Urethane Safety Issues
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:06 a.m.

Re: Urethane Safety Issues
Roy -- Sunday, 4 May 2008, at 11:06 a.m.

Re: Urethane Safety Issues
Bill Hamm -- Monday, 5 May 2008, at 2:10 a.m.

Re: Urethane Safety Issues
Roy -- Monday, 5 May 2008, at 5:58 a.m.

Ditto to what Bill said...------WebKitFormBoundary
Dan Caouette (CSFW)------WebKitFormBoundarydta+Yzz -- Monday, 5 May 2008, at 9:00 a.m.

Re: Urethane Safety Issues
Roy -- Wednesday, 7 May 2008, at 11:05 a.m.

Re: Material: hBN Coating Abrasion Test
Bill Hamm -- Wednesday, 30 April 2008, at 1:05 a.m.

Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- Wednesday, 30 April 2008, at 10:17 a.m.

Re: Material: hBN Coating Abrasion Test
Robert N Pruden -- Friday, 2 May 2008, at 1:50 p.m.

Re: Material: hBN Coating Abrasion Test
Acors -- Friday, 9 May 2008, at 5:11 p.m.

Re: Material: hBN Coating Abrasion Test------WebKi
Dan Caouette (CSFW------WebKitFormBoundaryHAvdf7mj -- Monday, 12 May 2008, at 8:21 a.m.

Kayak Building Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.