| |
Kayak Building Bulletin Board
Re: Pure Tung Oil?
Posted By: Mike Savage In Response To: Re: Pure Tung Oil? (kelly t)
Date: Monday, 3 September 2007, at 6:14 a.m.
: Bill,
: I recently posted a question on the qajakusa forum, asking how much varnish
: I'd need for an SOF. One reply I received mentioned that the builder buys
: polyurethane by the gallon, and immediately pours it into empty (new)
: one-quart containers, which he said only cost a dollar or so each. Pouring
: into small containers might be a solution to your oil problem, too.: How long till the oil hardens in the can? I have a quart-size can of tung oil
: finish, which I am using on a frame and paddle, but I see I will not need
: to use the whole quart right now.: kelly t
Hi Kelly and Bill,
Why not put the varnish or oil in something like some aircraft fuel tanks, the actual tank is a collapsable bag in the wing compartment. There used to be a babies bottle similar to that.
It would be handy for air sensitive liquids like varnish or oil.Mike Savage
South West Cork
| |
Kayak Building Bulletin Board is maintained by Nick Schade - Guillemot Kayaks with WebBBS 5.12.