Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: bulkhead shape
In Response To: Re: Strip: bulkhead shape ()

Yes and no.

You can print on a home printer just as you print the forms and glue the A4 sheets together. There are registration marks printed to make alignment accurate.

There is no provision for tilting the bulkhead., but a bit of manual adjustment of the shape makes that possible. The sides stay close to the line and the top and bottom are cut a bit outside the lines.

Messages In This Thread

Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape *PIC*
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape
Re: Strip: bulkhead shape