Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Epoxy: heat box
In Response To: Epoxy: heat box (warren williamson)
I place the resin and hardener on a heating pad.
It takes considerable time to heat up a full can, but the heat is at the bottom and so is the pump pickup.
It does thin out the epoxy and makes it easier to spread, even in a cold shop, and on a cold boat.
But if it sits in the mixing bowl for long it just cools off, again.
Messages In This Thread
- Epoxy: heat box
warren williamson -- 4/19/2017, 12:19 pm- Re: Epoxy: heat box
Nick Schade - Guillemot Kayaks -- 4/19/2017, 1:01 pm- Re: Epoxy: heat box
Rob Macks/Laughing Loon CC&K -- 4/19/2017, 2:28 pm- Re: Epoxy: heat box
JayBabina -- 4/19/2017, 4:02 pm- Re: Epoxy: heat box
JohnAbercrombie -- 4/19/2017, 4:07 pm- Re: Epoxy: heat box
Etienne Muller -- 4/19/2017, 6:23 pm- Re: Epoxy: heat box
Marc Upchurch -- 4/19/2017, 10:51 pm- Re: Epoxy: heat box
Etienne Muller -- 4/20/2017, 3:28 am - Re: Epoxy: heat box
- Re: Epoxy: heat box
