Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 2 X 4 's into strips
By:Bill Hamm
Date: 1/9/2017, 1:20 am
In Response To: Re: Strip: 2 X 4 's into strips (Richard Mertins)

Unless that wood is quite old, over say 75 years, it's very likely kiln dried. If it's sized nominal, 1 1/2" x 3 1/2" or there abouts you can just about guarantee that it's kiln dried. Old 2x4's were actually 2" thick and 4" wide, not common to find lumber that size after about the 1940's.

Bill H.

Messages In This Thread

Strip: 2 X 4 's into strips
Richard Mertins -- 1/3/2017, 6:41 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/3/2017, 8:36 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/3/2017, 11:54 pm
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/4/2017, 7:52 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 9:53 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 11:07 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/4/2017, 11:59 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 12:56 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/5/2017, 12:23 am
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/5/2017, 7:05 am
Overthinking
Curtis Fisher -- 1/5/2017, 8:16 pm
Re: Overthinking
Steve Solomon -- 1/6/2017, 12:12 am
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/6/2017, 3:12 am
Re: Strip: 2 X 4 's into strips
David Wyse -- 1/4/2017, 12:01 pm
Re: Strip: 2 X 4 's into strips
Steve Solomon -- 1/4/2017, 9:22 am
Re: Strip: 2 X 4 's into strips
Nick R. -- 1/4/2017, 4:18 pm
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/5/2017, 9:06 am
Re: Strip: 2 X 4 's into strips
JohnAbercrombie -- 1/7/2017, 11:16 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/7/2017, 11:34 am
Re: Strip: 2 X 4 's into strips
Rob Macks/Laughing Loon CC&K -- 1/7/2017, 11:50 am
Re: Strip: 2 X 4 's into strips
Richard Mertins -- 1/8/2017, 7:32 am
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/8/2017, 8:55 am
Re: Strip: 2 X 4 's into strips
dave koslow -- 1/9/2017, 2:11 pm
Re: Strip: 2 X 4 's into strips
Marc Upchurch -- 1/9/2017, 5:18 pm
Re: Strip: 2 X 4 's into strips
Bill Hamm -- 1/9/2017, 1:20 am