Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Lofting the Great Auk
By:JohnAbercrombie
Date: 11/27/2016, 1:48 pm
In Response To: Re: Strip: Lofting the Great Auk (Morris L Halsey)

My practice strips had a depth of 3/16, should I cut them thicker say to 1/4 or 5/16 to help when I start the sanding process?

When I first started building strip canoes in the 80s, 1/4" was the 'standard'. Now, those strips seem very thick - I cut strips 'just a bit over' 3/16" (about 5mm).
If you are using a design which is easy to strip (without a lot of twists) and follow the hints from the experts here (Rob Macks has good info on getting your strips to land fair) you won't need to do a great deal of sanding. And, with 3/16 strips (vs thicker) the strips are more flexible so they conform to curves more easily. A 1/4 strip is almost twice as stiff as a 3/16 one.

And, your stock will go a lot further with 3/16 vs thicker strips. Make sure you have a good ripping setup with a short ripping fence and a good outfeed table so your strips are consistent thickness.

Messages In This Thread

Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 11:46 am
Re: Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 11:52 am
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/1/2015, 11:57 am
Re: Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 12:30 pm
Re: Strip: Link Still Bad *NM*
Marc Upchurch -- 11/1/2015, 1:01 pm
Re: Strip: Lofting the Great Auk
Morris L Halsey -- 11/26/2016, 7:28 pm
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/26/2016, 8:51 pm
Re: Strip: Lofting the Great Auk
Morris L Halsey -- 11/26/2016, 11:27 pm
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/27/2016, 12:19 am
Re: Strip: Lofting the Great Auk
Bill Hamm -- 11/27/2016, 12:19 am
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/27/2016, 12:36 am
Re: Strip: Lofting the Great Auk
Morris L Halsey -- 11/27/2016, 12:44 pm
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/27/2016, 1:48 pm
Re: Strip: Lofting the Great Auk
anewhouse -- 11/27/2016, 3:17 am
Re: Strip: scarfs ..Lofting? *PIC*
Paul Sylvester -- 11/27/2016, 6:03 am
Re: Strip: Lofting the Great Auk
Bill Hamm -- 11/28/2016, 12:06 am
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/28/2016, 1:45 am
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/28/2016, 6:25 am
Re: Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 1:45 pm
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/1/2015, 2:37 pm
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/1/2015, 2:35 pm
Re: Strip: Lofting the Great Auk *PIC*
Morris L. Halsey -- 11/1/2015, 3:31 pm
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/1/2015, 5:44 pm
Re: Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 7:53 pm
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/1/2015, 9:48 pm
Re: Strip: Lofting the Great Auk
Morris L. Halsey -- 11/1/2015, 11:08 pm
Re: Strip: Lofting the Great Auk
Marc Upchurch -- 11/2/2015, 4:32 am
Re: Strip: Lofting the Great Auk *PIC*
Etienne Muller -- 11/27/2016, 7:30 am
Re: Strip: Lofting the Great Auk *PIC*
Etienne Muller -- 11/27/2016, 7:34 am
Re: Strip: Lofting the Great Auk
Tom Larson -- 11/27/2016, 11:45 am
Re: Strip: Lofting the Great Auk
Etienne Muller -- 11/27/2016, 1:59 pm
Re: Strip: Lofting the Great Auk
Mike Bielski -- 11/27/2016, 10:24 pm
Re: Strip: Lofting the Great Auk
JohnAbercrombie -- 11/2/2015, 12:33 am
Re: Strip: Lofting the Great Auk
Bill Hamm -- 11/2/2015, 4:08 am
Re: Strip: Lofting the Great Auk
Bill Hamm -- 11/2/2015, 12:14 am