Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Inside or Outside??
By:Olli
Date: 8/15/2016, 4:11 pm
In Response To: Epoxy: Inside or Outside?? (Robert Ross)

The hull and deck are glassed while still on the forms which helps preserve the shape especially when sanding/faring, so it is necessary to glass the outsides first and then, once hardened, remove from the forms, sand the inside and glass.
Your epoxy is probably okay, but take a few scraps and run some tests to be sure. Or just bite the bullet and buy some fresh epoxy.

Messages In This Thread

Epoxy: Inside or Outside??
Robert Ross -- 8/15/2016, 2:34 pm
Re: Epoxy: Inside or Outside??
Olli -- 8/15/2016, 4:11 pm
Re: Epoxy: Inside or Outside??
Marc Upchurch -- 8/15/2016, 5:16 pm
Re: Epoxy: Inside or Outside??
Etienne Muller -- 8/15/2016, 6:24 pm
Re: Epoxy: Inside or Outside??
Marc Donnelly -- 8/15/2016, 6:41 pm
Re: Epoxy: Inside or Outside?? *PIC*
Etienne Muller -- 8/16/2016, 4:08 am
Re: Epoxy: Inside or Outside??
JohnAbercrombie -- 8/16/2016, 1:07 pm
Re: Epoxy: Inside or Outside??
Alex Ferguson -- 8/15/2016, 6:25 pm
Re: Epoxy: Inside or Outside??
Bill Hamm -- 8/16/2016, 12:11 am