Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Off Topic: Joining plywood for bed base w/ lim
By:Bill Hamm
Date: 8/6/2016, 7:03 am
In Response To: Re: Off Topic: Joining plywood for bed base w/ lim (Marc Upchurch)

Actually using a butt block should work fine, you really only need one piece on the bottom. It should be the same thickness as the existing plywood. Home Depot and Lowes will cut plywood to your specs so you won't need a saw. Titebond glue will work fine with screws as a clamp.

Bill H.

Messages In This Thread

Off Topic: Joining plywood for bed base w/ limited tools
Doug S -- 8/6/2016, 1:32 am
Re: Off Topic: Joining plywood for bed base w/ lim
Marc Upchurch -- 8/6/2016, 3:26 am
Re: Off Topic: Joining plywood for bed base w/ lim
Bill Hamm -- 8/6/2016, 7:03 am
Re: Off Topic: Joining plywood for bed base w/ lim
Doug S -- 8/10/2016, 12:36 am
Re: Off Topic: Joining plywood for bed base w/ lim
Bill Hamm -- 8/11/2016, 12:34 am