Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Delamination
By:Rob Macks/Laughing Loon CC&K
Date: 8/1/2016, 5:03 pm
In Response To: Strip: Delamination *PIC* (Shawn jones)

Whats the inside look like?

What weight glass?

That's some impact! Glue joins and butt joints failed.

You can remove the old glass with a heat gun. Try to cut the glass without cutting into the wood. Hold a razor almost parallel to the glass. If you can remove the glass without removing the epoxy you can sand lightly with 80 grit and apply new glass overlapping the old glass by 3 inches. Fill the weave and feather.

Rob

Messages In This Thread

Strip: Delamination *PIC*
Shawn jones -- 8/1/2016, 4:10 pm
Re: Strip: Delamination
Rob Macks/Laughing Loon CC&K -- 8/1/2016, 5:03 pm
Re: Strip: Delamination
Shawn jones -- 8/1/2016, 5:44 pm
Re: Strip: Delamination
Rob Macks/Laughing Loon CC&K -- 8/1/2016, 6:53 pm
Re: Strip: Delamination
Marc Upchurch -- 8/1/2016, 5:05 pm
Re: Strip: Delamination
John K -- 8/1/2016, 6:09 pm
Re: Strip: Delamination
Mike Bielski -- 8/1/2016, 10:33 pm
Re: Strip: Delamination
scottbaxter -- 8/2/2016, 12:13 am
Re: Strip: Delamination
jaybabina -- 8/2/2016, 8:31 am
Re: Strip: Delamination
Yoshi -- 8/2/2016, 8:49 am
Re: Strip: Delamination
Nick Schade - Guillemot Kayaks -- 8/2/2016, 9:51 am
Re: Strip: Delamination
Justin -- 8/2/2016, 10:30 am
Re: Strip: Delamination
Sam McFadden -- 8/2/2016, 10:29 am
Re: Strip: Delamination
Shawn Jones -- 8/2/2016, 2:28 pm
Re: Strip: Delamination
Marc Donnelly -- 8/2/2016, 5:20 pm
Re: Strip: Delamination
John VB -- 8/3/2016, 7:01 am
Re: Strip: Delamination
Shawn Jones -- 8/5/2016, 11:46 am