Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Paulownia timber
By:Dave Gentry
Date: 4/22/2016, 1:21 pm
In Response To: Skin-on-Frame: Paulownia timber (Nigel McCarter)

We used it on one of my boats. It's lighter and more fragile than WRC, and beefing up the scantlings seems like a good idea. Paulownia is strong enough (if you are careful with the boat), as noted, but I probably won't use it again.

I think it'd make for a very light paddle, though. Perhaps best in conjunction with some other wood if you laminate it.

I don't really remember the source, but it was in short lengths only.

Dave

Messages In This Thread

Skin-on-Frame: Paulownia timber
Nigel McCarter -- 4/21/2016, 4:25 pm
Re: Skin-on-Frame: Paulownia timber
Mike Bielski -- 4/21/2016, 11:50 pm
Re: Skin-on-Frame: Paulownia timber
John Messinger -- 4/22/2016, 1:15 pm
Re: Skin-on-Frame: Paulownia timber
Mike Bielski -- 4/22/2016, 3:42 pm
Re: Skin-on-Frame: Paulownia timber
John Messinger -- 4/22/2016, 4:31 pm
Re: Skin-on-Frame: Paulownia timber
Mike Bielski -- 4/24/2016, 10:08 am
Re: Skin-on-Frame: Paulownia timber
Nigel Mccarter -- 4/22/2016, 3:58 pm
Re: Skin-on-Frame: Paulownia timber
Allan -- 4/22/2016, 3:23 am
Re: Skin-on-Frame: Paulownia timber
Dave Gentry -- 4/22/2016, 1:21 pm