Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Varnishing outside
By:Brian Nystrom
Date: 1/30/2016, 12:09 pm
In Response To: Varnishing outside (Jaybabina)

I'd be VERY careful about "piling on coats without too much time". Varnish requires oxygen to cure. Covering an insufficiently-cured coat with more varnish cuts off the oxygen supply and can exponentially increase curing time. You can end up with a thick layer of varnish that takes weeks, or even months, to harden. Applying thin coats and sticking with the manufacturer's recoat time recommendation is the best bet.

Messages In This Thread

Strip: Work in basement?
Rob -- 9/7/2015, 8:43 am
Re: Strip: Work in basement?
Joe -- 9/7/2015, 10:17 am
Varnishing outside
Jaybabina -- 1/29/2016, 1:35 pm
Re: Varnishing outside
Marc Upchurch -- 1/29/2016, 4:46 pm
Re: Varnishing outside
scottbaxter -- 1/29/2016, 4:56 pm
Re: Varnishing outside
Etienne Muller -- 1/29/2016, 6:22 pm
Re: Varnishing outside
Bill Hamm -- 1/29/2016, 8:29 pm
Re: Varnishing outside
Brian Nystrom -- 1/30/2016, 12:09 pm
Re: Strip: Work in basement?
Nick Schade - Guillemot Kayaks -- 9/7/2015, 10:31 am
Re: Strip: Work in basement?
Rob -- 9/7/2015, 11:56 am
Re: Strip: Work in basement?
Jeff Horton -- 9/7/2015, 5:07 pm
Re: Strip: Work in basement?
Shawn Jones -- 9/7/2015, 8:12 pm
Re: Strip: Work in basement?
Etienne Muller -- 1/30/2016, 5:12 am
Re: Strip: Work in basement?
Bill Hamm -- 1/30/2016, 7:30 am
Re: RO Sanders and Dust Collection
Nick Schade - Guillemot Kayaks -- 9/7/2015, 9:05 pm
Re: RO Sanders and Dust Collection *PIC*
Rob Macks/Laughing Loon CC&K -- 9/8/2015, 4:23 pm
Re: Strip: Work in basement?
Paul Sylvester -- 9/8/2015, 7:09 am
Re: Strip: Work in basement?
Nick Riccardi -- 9/7/2015, 12:00 pm
Re: Strip: Work in basement?
Dan Thaler -- 9/7/2015, 7:19 pm
Re: Strip: Work in basement?
Bill Hamm -- 9/8/2015, 2:58 am
Re: Strip: Work in basement?
Jay Babina -- 9/8/2015, 8:03 am
Re: Strip: Work in basement? *PIC*
Rob Macks/Laughing Loon CC&K -- 9/8/2015, 8:37 am
Value of expensive sanders
Nick Schade - Guillemot Kayaks -- 9/8/2015, 4:17 pm
Re: Value of expensive sanders
Rob Macks/Laughing Loon CC&K -- 9/8/2015, 5:00 pm
Re: Value of expensive sanders *PIC*
Rob Macks/Laughing Loon CC&K -- 9/8/2015, 5:20 pm
Re: Value of expensive sanders *PIC*
Nick Schade - Guillemot Kayaks -- 9/8/2015, 7:46 pm
Re: Value of expensive sanders
Bill Hamm -- 9/9/2015, 12:54 am
Re: Value of expensive sanders
Rob Macks/Laughing Loon CC&K -- 9/9/2015, 8:59 am
Re: Value of expensive sanders
Nick Schade - Guillemot Kayaks -- 9/9/2015, 9:36 am
Re: Value of expensive sanders
Etienne Muller -- 1/30/2016, 5:22 am
Re: Value of expensive sanders
Bill Hamm -- 1/30/2016, 7:27 am
Re: Value of expensive sanders *PIC*
Rob Macks/Laughing Loon CC&K -- 9/9/2015, 8:46 am
Re: Value of expensive sanders *PIC*
Rob Macks/Laughing Loon CC&K -- 9/9/2015, 8:49 am
Re: Value of expensive sanders
Nick Schade - Guillemot Kayaks -- 9/9/2015, 9:18 am
Re: Value of expensive sanders
Daniel Thaler -- 9/9/2015, 3:15 pm
Re: Value of expensive sanders *PIC*
Nick Schade - Guillemot Kayaks -- 1/26/2016, 8:23 pm
Re: Value of expensive sanders
JohnAbercrombie -- 1/27/2016, 2:13 am
Re: Value of expensive sanders
Nick Schade - Guillemot Kayaks -- 1/27/2016, 8:10 am
Re: Value of expensive sanders *PIC*
Rob Macks/Laughing Loon CC&K -- 1/27/2016, 9:28 am
Re: Value of expensive sanders
Nick Schade - Guillemot Kayaks -- 1/27/2016, 9:30 pm
Re: Value of expensive sanders
Bill Hamm -- 1/28/2016, 2:03 am
Re: Value of expensive sanders *PIC*
Nick Schade - Guillemot Kayaks -- 1/28/2016, 8:42 am
Re: Value of expensive sanders *PIC*
Rob Macks/Laughing Loon CC&K -- 1/28/2016, 8:59 am
Re: Value of expensive sanders
Bill Hamm -- 1/28/2016, 9:07 am
Re: Value of expensive sanders
scottbaxter -- 1/28/2016, 11:34 am
Sanding Video
Nick Schade - Guillemot Kayaks -- 1/28/2016, 9:03 pm
Re: Sanding Video
Marc Donnelly -- 1/29/2016, 11:48 am
Re: Sanding Video
Nick Schade - Guillemot Kayaks -- 1/29/2016, 12:25 pm
Re: Sanding Video
Rob Macks/Laughing Loon CC&K -- 1/29/2016, 11:06 pm
Re: Value of expensive sanders
JohnAbercrombie -- 1/27/2016, 12:25 pm
Re: Value of expensive sanders
Rob Macks/Laughing Loon CC&K -- 1/27/2016, 4:03 pm
Re: Value of expensive sanders
Dan Caouette (CSCWC) -- 1/27/2016, 6:48 pm
Re: Value of expensive sanders
Marc Donnelly -- 1/27/2016, 7:04 pm
Re: Value of expensive sanders *PIC*
Nick Schade - Guillemot Kayaks -- 1/27/2016, 9:40 pm
Re: Value of expensive sanders
Bill Hamm -- 1/28/2016, 2:12 am
Re: Value of expensive sanders
Rob Macks/Laughing Loon CC&K -- 1/27/2016, 11:50 am
Re: Value of expensive sanders
Etienne Muller -- 1/27/2016, 3:51 pm
Re: Value of expensive sanders
Marc Donnelly -- 1/27/2016, 6:46 pm
Re: Value of expensive sanders
Bill Hamm -- 1/28/2016, 2:22 am
Hateful tools
Nick Schade - Guillemot Kayaks -- 9/9/2015, 11:32 am
Re: Hateful tools
Paul Sylvester -- 9/9/2015, 11:56 am
Re: Hateful tools
Jay Babina -- 9/9/2015, 2:40 pm
Re: Hateful tools
Rob Macks/Laughing Loon CC&K -- 9/9/2015, 3:15 pm
Re: Hateful tools
Bill Hamm -- 9/9/2015, 3:42 pm
Re: Hateful tools
Jay Babina -- 9/9/2015, 6:22 pm
Air Tools
Dan Caouette (CSCWC) -- 9/10/2015, 9:12 am
Re: Air Tools
Bill Hamm -- 9/10/2015, 2:10 pm
Re: Hateful tools
Rob Macks/Laughing Loon CC&K -- 9/9/2015, 1:24 pm
Re: Hateful tools
Bill Hamm -- 9/9/2015, 3:59 pm
Hand sanding... (pic) *PIC*
Dan Caouette (CSCWC) -- 9/10/2015, 9:18 am
Re: Hand sanding... (pic)
Bill Hamm -- 9/10/2015, 2:13 pm
Re: Hateful tools
JohnAbercrombie -- 9/9/2015, 2:04 pm
Re: Hateful tools
Bill Hamm -- 9/9/2015, 4:00 pm
Re: Strip: Work in basement?
Paul Sylvester -- 9/8/2015, 7:55 pm
Re: Strip: Work in basement?
Rob -- 9/8/2015, 8:07 pm
Re: Strip: Work in basement?
Bill Hamm -- 9/9/2015, 3:48 pm