Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Repairing delamination
By:Bill Hamm
Date: 9/2/2015, 1:00 am
In Response To: Re: Strip: Repairing delamination (Marc Upchurch)

That's the problem of using fence boards, which 4x4's are (fence posts), they are usually not dried well if at all. Not a problem if you cut the wood well before you intend to use it, just cut into strips and bundle it again, tape the bundles so it dries straight and let it sit.

Bill H.

Messages In This Thread

Strip: Repairing delamination
Peter Patel-Schneider -- 8/31/2015, 10:00 am
Re: Strip: Repairing delamination
Marc Upchurch -- 8/31/2015, 7:11 pm
Re: Strip: Repairing delamination
dave koslow -- 9/1/2015, 11:24 am
Re: Strip: Repairing delamination
Marc Upchurch -- 9/1/2015, 9:22 pm
Re: Strip: Repairing delamination
Bill Hamm -- 9/2/2015, 1:00 am
Re: Strip: Repairing delamination
Bill Hamm -- 9/1/2015, 2:12 am
Re: Strip: Repairing delamination
Jay Babina -- 9/1/2015, 8:32 pm
Re: Strip: Repairing delamination
Bill Hamm -- 9/2/2015, 1:02 am