Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: epoxy
By:Nick Schade - Guillemot Kayaks
Date: 5/5/2015, 9:18 am
In Response To: Re: Epoxy: epoxy (john1959)

What I'm wanting to do is use a very thin polyester or nylon fabric with a realtree pattern,

Unless the fabric is intended to be laid up with epoxy, I would not trust these fabric to create a strong bond.

Nylon an polyester fabrics are often used as a "peel ply" where the fabric is intentionally peeled off after the epoxy has cured to create a smooth surface. I.e. the are used because they don't bond very well with epoxy.

It may work for a light duty boat, but may be subject to easy damage.

Messages In This Thread

Epoxy: epoxy
john1959 -- 5/5/2015, 12:17 am
Re: Epoxy: epoxy
Rod Tait -- 5/5/2015, 12:51 am
Re: Epoxy: epoxy
daveg -- 5/5/2015, 1:30 am
Re: Epoxy: epoxy
john1959 -- 5/5/2015, 2:55 am
Re: Epoxy: epoxy
Dan Thaler -- 5/5/2015, 6:07 am
Re: Epoxy: epoxy
Nick Schade - Guillemot Kayaks -- 5/5/2015, 9:18 am
Re: Epoxy: epoxy
Mike Bielski -- 5/5/2015, 11:38 pm
Re: Epoxy: epoxy
Bill Hamm -- 5/6/2015, 2:26 am
Re: Epoxy: epoxy Camo has a use
J vanburen -- 5/6/2015, 6:49 am
Re: Epoxy: epoxy Camo has a use
john1959 -- 5/6/2015, 9:39 pm
Re: Epoxy: epoxy Camo has a use
Marc Upchurch -- 5/7/2015, 2:55 am
Re: Epoxy: epoxy Camo has a use
john1959 -- 5/10/2015, 7:00 am
Re: Epoxy: epoxy Camo has a use
roym@computerpro.com -- 5/10/2015, 9:18 am
Re: Epoxy: epoxy Camo has a use
scottbaxter -- 5/10/2015, 10:17 am
Re: Epoxy: epoxy Camo has a use
Bill Hamm -- 5/11/2015, 12:39 am
Re: Epoxy: epoxy Camo has a use
J vanburen -- 5/11/2015, 6:41 am
Re: Epoxy: epoxy Camo has a use
Bill Hamm -- 5/11/2015, 3:10 pm
Re: Epoxy: epoxy Camo has a use
scottbaxter -- 5/11/2015, 5:29 pm
Re: Epoxy: epoxy Camo has a use
Dan Caouette (CSCWC) -- 5/11/2015, 5:51 pm
Re: Epoxy: epoxy Camo has a use
Bill Hamm -- 5/12/2015, 2:27 am
Re: Epoxy: epoxy
john1959 -- 5/5/2015, 11:15 am
Re: Epoxy: epoxy
Jay babina -- 5/5/2015, 11:51 am
Re: Epoxy: epoxy
Bill Hamm -- 5/6/2015, 2:25 am