Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: ROS throwing disc'c
By:Mike Bielski
Date: 1/30/2015, 5:23 pm
In Response To: Re: Strip: ROS throwing disc'c (Marc Upchurch)

Unless you are doing monstrous amounts of work with a single disc and have external dust collection (since I've never seen stick-ons that had vacuum dust extraction) I don't think that they're better. There are a lot of projects that I do which are small and don't use up a sheet. If you've got peel-and-stick that piece of paper is just gone- they're not reusable. I do not suffer a dull piece of sandpaper- I pitch that stuff as soon as it stops cutting- but I would waste way too much if I didn't have velcro. That's why we had 4 sanders all with different grits at the shop. That way 120 was always 120. You didn't need to take off the 120 and put on 180 whether the 120 was used up or not.

m

Messages In This Thread

Strip: ROS throwing disc'c
Randy -- 1/29/2015, 12:06 pm
Re: Strip: ROS throwing disc'c
Etienne Muller -- 1/29/2015, 12:17 pm
Re: Strip: ROS throwing disc'c
Etienne Muller -- 1/29/2015, 12:19 pm
Re: Strip: ROS throwing disc'c
Roy Martin -- 1/29/2015, 12:24 pm
Re: Strip: ROS throwing disc'c
jay Babina -- 2/14/2015, 6:52 am
Re: Strip: ROS throwing disc'c
JohnAbercrombie -- 2/14/2015, 2:50 pm
Re: Strip: ROS throwing disc'c
Paul -- 1/29/2015, 12:24 pm
Re: Strip: ROS throwing disc'c
Mike Bielski -- 1/29/2015, 12:58 pm
Re: Strip: ROS throwing disc'c
Jay Babina -- 1/29/2015, 2:54 pm
Re: Strip: ROS throwing disc'c
Mike Bielski -- 1/30/2015, 9:53 am
Re: Strip: ROS throwing disc'c
Marc Upchurch -- 1/30/2015, 12:50 pm
Re: Strip: ROS throwing disc'c
Mike Bielski -- 1/30/2015, 5:23 pm
Re: Strip: ROS throwing disc'c
Jay Babina -- 1/30/2015, 5:15 pm
Re: Strip: ROS throwing disc'c
Bill Hamm -- 1/30/2015, 6:44 pm
Re: Strip: ROS throwing disc'c
Don T. -- 1/31/2015, 8:06 pm
Re: Strip: ROS throwing disc'c
Etienne Muller -- 2/13/2015, 11:58 am
Re: Strip: ROS throwing disc'c
Nick Riccardi -- 2/13/2015, 12:27 pm
Re: Strip: ROS throwing disc'c
Mike Bielski -- 2/13/2015, 1:54 pm
Re: Strip: ROS throwing disc'c
Etienne Muller -- 2/13/2015, 2:13 pm
Re: Strip: ROS throwing disc'c
Randy -- 2/13/2015, 3:43 pm
Re: Strip: ROS throwing disc'c
Etienne Muller -- 2/13/2015, 6:43 pm
Re: Strip: ROS throwing disc'c
Mike Bielski -- 2/13/2015, 10:33 pm
Re: Strip: ROS throwing disc'c
Rob Macks/Laughing Loon CC&K -- 2/14/2015, 8:25 am
Re: Strip: ROS throwing disc'c
Mike Bielski -- 2/14/2015, 4:01 pm
Re: Strip: ROS throwing disc'c
Rob Macks/Laughing Loon CC&K -- 2/14/2015, 4:22 pm
Re: Strip: ROS throwing disc'c
JohnAbercrombie -- 2/14/2015, 7:36 pm
Re: Strip: ROS throwing disc'c
Bill Hamm -- 2/14/2015, 6:45 am
Re: Strip: ROS throwing disc'c
Bill Hamm -- 2/14/2015, 7:10 am