Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Drips of epoxy on surface
By:Jay
Date: 1/4/2015, 6:48 pm
In Response To: Re: Strip: Drips of epoxy on surface (Mike Bielski)

I have now re-coated it with a very thin coat of epoxy which I applied with a foam roller and where any slight drips occurred (very few this time since much less material applied) I used a foam brush. However, this very thin coat has not flowed out to a gloss surface. It has a very granular matte appearance, just like an impression of the surface of the foam roller. I assume I'm going to have to sand it all off and re-apply, but not sure what I could have done to avoid this, and what will prevent it from happening again. I had hoped to be able to move on to varnish by now, but it doesn't seem to be in the cards

Messages In This Thread

Strip: Drips of epoxy on surface
Jay -- 12/18/2014, 7:25 am
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 12/18/2014, 8:43 am
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 9:29 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 12/18/2014, 1:12 pm
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 2:02 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 2:27 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 9:34 am
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/18/2014, 10:22 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 12/18/2014, 1:08 pm
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/18/2014, 2:44 pm
Re: Strip: Drips of epoxy on surface
Les Cheeseman -- 12/18/2014, 3:41 pm
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 4:26 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/19/2014, 8:28 am
Re: Strip: Drips of epoxy on surface
rich -- 12/18/2014, 2:21 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 2:37 pm
Re: Strip: Drips of epoxy on surface
wanderfalk -- 12/25/2014, 1:53 am
Re: Strip: Drips of epoxy on surface *PIC*
Etienne Muller -- 12/18/2014, 6:32 pm
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/19/2014, 12:51 am
Re: Strip: Drips of epoxy on surface
Jay -- 1/4/2015, 6:48 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/4/2015, 7:39 pm
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/4/2015, 8:44 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/4/2015, 8:50 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 1/5/2015, 12:10 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/5/2015, 8:23 am
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/5/2015, 7:45 pm
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/5/2015, 10:08 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/5/2015, 10:23 pm
Re: Strip: Drips of epoxy on surface
Jay -- 1/5/2015, 10:34 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 1/6/2015, 12:32 am
Re: Strip: Drips of epoxy on surface
Etienne Muller -- 1/6/2015, 4:40 am
Re: Strip: Drips of epoxy on surface
JohnAbercrombie -- 1/4/2015, 9:52 pm