Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: bead not coming out right on router
By:Bob Ten Eyck
Date: 11/2/2014, 10:58 am
In Response To: Re: Strip: bead not coming out right on router (Marc Upchurch)

Ditch the bead and cove-too much trouble. Once you get the hang of the hand plane bevel ,you will be hooked

Messages In This Thread

Strip: bead not coming out right on router
Marc -- 11/2/2014, 12:40 am
Re: Strip: bead not coming out right on router
Jim777 -- 11/2/2014, 5:04 am
Re: Strip: bead not coming out right on router
Etienne Muller -- 11/2/2014, 7:12 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 9:12 am
Re: Strip: bead not coming out right on router
Bob Ten Eyck -- 11/2/2014, 10:58 am
Re: Strip: bead not coming out right on router
Jay Babina -- 11/2/2014, 5:36 pm
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 5:54 pm
Re: Strip: bead not coming out right on router
Dan Thaler -- 11/2/2014, 6:24 pm
Re: Strip: bead not coming out right on router
JohnAbercrombie -- 11/2/2014, 11:06 pm
Re: Strip: bead not coming out right on router
Etienne Muller -- 11/3/2014, 8:14 am
Re: Strip: bead not coming out right on router
Mike Bielski -- 11/5/2014, 8:36 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/3/2014, 8:22 am
Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 7:15 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/4/2014, 8:04 am
Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 8:28 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/5/2014, 12:45 am
Re: Strip: bead not coming out right on router
Allan -- 11/5/2014, 1:59 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 12:17 am
Re: Strip: bead not coming out right on router
Allan -- 11/6/2014, 3:57 am
Re: Strip: bead not coming out right on router
Dan Caouette (CSCWC) -- 11/6/2014, 7:46 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 2:32 pm
Re: Strip: bead not coming out right on router
ddaniels -- 11/7/2014, 5:48 pm
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/8/2014, 6:38 am