Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Sanded through fiberglass weave
By:Brian Nystrom
Date: 10/23/2014, 7:23 am
In Response To: Re: Strip: Sanded through fiberglass weave (Triad)

You can also try using a carbide scraper, which produces a much smoother surface than sanding. However, rather than experimenting on the boat, I suggest that you make a test panel and try a few methods of fixing it.

Messages In This Thread

Strip: Sanded through fiberglass weave
Alex Helwig -- 10/22/2014, 6:59 pm
Re: Strip: Sanded through fiberglass weave
Triad -- 10/22/2014, 8:02 pm
Re: Strip: Sanded through fiberglass weave
Alex Helwig -- 10/22/2014, 9:16 pm
Re: Strip: Sanded through fiberglass weave
Triad -- 10/23/2014, 6:41 am
Re: Strip: Sanded through fiberglass weave
Brian Nystrom -- 10/23/2014, 7:23 am
Yes - fine sand
Jay Babina -- 10/23/2014, 1:41 pm
Re: Strip: Sanded through fiberglass weave
Rob Macks/Laughing Loon CC&K -- 10/27/2014, 6:17 pm