Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Maroske tunnel problem
By:Jay Stallman
Date: 10/14/2014, 8:38 am
In Response To: Re: Maroske tunnel problem *PIC* (Etienne Muller)

Thanks so much for your advice. I have not yet bonded the hull to the deck so I have easy access to cut out the tube from the loop but if I can get the plastic out and preserve the existing tunnel, that would be less of a mess. If I have to cut the tube out, I will have to re-insert another plastic tube to re-create the tunnel and may encounter the same problem again. The diameter of the tunnel will probably not allow the thickness of a Teflon wrap, although I will try that on the next tunnel I make. (I have to do two more for a rear hatch). The centers are 1 inch apart except on the fore hatch where they are closer to two inches. One tube snapped in a 1 inch tunnel and one snapped in a two inch tunnel. I think I'll try the tile saw. Thanks again.
Jay

Messages In This Thread

Strip: Bow end of Deck
aikijay -- 8/30/2014, 9:19 am
Re: Strip: Bow end of Deck
Marc Upchurch -- 8/30/2014, 9:51 am
Re: Strip: Bow end of Deck
Rod Tait -- 8/30/2014, 10:32 am
Re: Strip: Bow end of Deck *PIC*
Etienne Muller -- 8/30/2014, 2:31 pm
Re: Strip: Bow end of Deck
aikijay -- 8/30/2014, 2:57 pm
Re: Strip: Bow end of Deck *PIC*
Etienne Muller -- 8/30/2014, 3:58 pm
Re: Strip: Bow end of Deck
Jay Stallman -- 8/31/2014, 7:36 am
Re: Strip: Bow end of Deck
Etienne Muller -- 8/31/2014, 12:29 pm
Re: Strip: Bow end of Deck
JohnAbercrombie -- 8/31/2014, 12:29 pm
Re: Strip: Bow end of Deck
Jay Stallman -- 9/2/2014, 12:52 pm
Re: Strip: Bow end of Deck
Etienne Muller -- 9/2/2014, 1:27 pm
Re: Strip: Bow end of Deck
Jay Stallman -- 9/2/2014, 11:15 pm
Re: Strip: Bow end of Deck *PIC*
Etienne Muller -- 9/3/2014, 5:40 am
Re: Strip: Bow end of Deck
Nick Schade - Guillemot Kayaks -- 9/3/2014, 7:50 am
Re: Strip: Bow end of Deck
Etienne Muller -- 9/3/2014, 12:17 pm
Re: Strip: Bow end of Deck
Nick Schade - Guillemot Kayaks -- 9/6/2014, 12:08 am
Re: Strip: Bow end of Deck-Air bags
JohnAbercrombie -- 9/6/2014, 11:43 am
Re: Strip: Bow end of Deck-Air bags
Etienne Muller -- 9/6/2014, 1:07 pm
Re: Strip: Bow end of Deck-Air bags
JohnAbercrombie -- 9/6/2014, 1:37 pm
Re: Strip: Bow end of Deck-Air bags
Etienne Muller -- 9/6/2014, 1:52 pm
Re: Strip: Bow end of Deck
aikijay -- 9/2/2014, 7:49 am
Re: Strip: Bow end of Deck *PIC*
Etienne Muller -- 9/2/2014, 2:52 pm
Re: Strip: Bow end of Deck
george jung -- 9/2/2014, 3:40 pm
Re: Strip: Bow end of Deck
Jay Stallman -- 9/3/2014, 8:11 am
Re: Strip: Bow end of Deck
Etienne Muller -- 9/3/2014, 12:10 pm
Re: Maroske tunnel problem
aikijay -- 10/14/2014, 12:36 am
Re: Maroske tunnel problem *PIC*
Etienne Muller -- 10/14/2014, 5:28 am
Re: Maroske tunnel problem
Jay Stallman -- 10/14/2014, 8:38 am
Re: Maroske tunnel problem
Mike Bielski -- 10/14/2014, 1:53 pm
Re: Maroske tunnel problem
aikijay -- 10/20/2014, 5:50 pm
Re: Maroske tunnel problem *PIC*
Etienne Muller -- 10/20/2014, 6:08 pm
Re: Maroske tunnel problem
Etienne Muller -- 10/14/2014, 5:54 am
Re: Maroske tunnel problem
John Messinger -- 10/14/2014, 6:32 am
Re: Maroske tunnel problem *PIC*
Sean Dawe -- 10/14/2014, 8:35 am
Try Latex Tubing *PIC*
Dan Caouette (CSCWC) -- 10/14/2014, 9:18 am
Re: Try Latex Tubing
JohnAbercrombie -- 10/14/2014, 1:22 pm
Re: Try Latex Tubing
Ric Moodie -- 10/16/2014, 10:43 pm