Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: CLC Shearwater 17 Build
By:Gero Verheyen
Date: 10/11/2014, 6:11 pm
In Response To: S&G: CLC Shearwater 17 Build (Gero)

Today I spent on the cockpit coaming and some other bits and pieces to be installed. Consistent with my decision not to drill any holes in the boat, I took some maple scraps and fabricated the pieces for my invisible hatch system. I will glue two strips with a hole at each end on the sides of the hull in each hold - these will have bungie loops. I have rounded over all the edges (except of course the bottoms which attach to the hull)

The bungies will hook into and around these pieces, which will be glued to the underside of the hatch lid.

I have not yet made the maple tabs which will be glued to the outside of the hatches to pull them up so the bungies can be released.

I cleaned up the coaming, rounding it over with a 1/4 radius bit, and then sanded and filed the inside in preparation for the glassing. The first image is a before shot.

I then laid down the glass and wet it out, and cut out the inside so that I could glass the inside edge of the coaming.

Messages In This Thread

S&G: CLC Shearwater 17 Build
Gero -- 9/15/2014, 10:17 pm
Re: S&G: CLC Shearwater 17 Build
JohnAbercrombie -- 9/15/2014, 10:26 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/15/2014, 10:31 pm
Re: S&G: CLC Shearwater 17 Build
John Messinger -- 9/16/2014, 8:04 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/17/2014, 1:22 pm
Re: S&G: CLC Shearwater 17 Build *PIC*
JohnAbercrombie -- 9/17/2014, 3:37 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/17/2014, 10:42 pm
Re: S&G: CLC Shearwater 17 Build
Niven Paine -- 9/18/2014, 2:01 am
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/17/2014, 10:40 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/19/2014, 12:00 am
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/19/2014, 12:02 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/20/2014, 12:24 am
Re: S&G: CLC Shearwater 17 Build
george jung -- 9/20/2014, 12:04 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/20/2014, 12:30 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/21/2014, 12:40 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/22/2014, 11:31 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/24/2014, 1:02 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 12:43 am
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/25/2014, 9:08 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 9:19 am
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/25/2014, 5:56 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 11:36 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/26/2014, 4:47 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/27/2014, 6:37 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/27/2014, 8:18 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/29/2014, 11:33 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/1/2014, 11:04 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/5/2014, 5:59 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/7/2014, 11:17 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/8/2014, 4:49 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/8/2014, 5:54 pm
Re: S&G: CLC Shearwater 17 Build
Yoshi -- 10/8/2014, 10:12 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/9/2014, 12:50 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/10/2014, 4:21 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/11/2014, 9:00 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/11/2014, 6:11 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/14/2014, 11:44 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/26/2014, 10:35 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/27/2014, 12:29 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/27/2014, 7:39 am