Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: urethane problem
By:Gerhardt Raven
Date: 9/21/2014, 1:11 am
In Response To: Re: Skin-on-Frame: urethane problem (Patrick_North)

I had a similar problem last winter. The temperature was 5 to 8 degrees Celsius and the urethane took a week to cure. Tech support at Spirit Line said that 8 degrees was OK but I highly recommend heating the workspace to 15 Celsius. Sticky urethane seems to cure faster in the sun. Let us know if it ever cures.

Messages In This Thread

Skin-on-Frame: urethane problem
Patrick_North -- 9/15/2014, 12:18 pm
Re: Skin-on-Frame: urethane problem
Robert W -- 9/15/2014, 3:25 pm
Re: Skin-on-Frame: urethane problem
Patrick_North -- 9/16/2014, 8:04 am
Re: Skin-on-Frame: urethane problem *PIC*
Mike Hanks -- 9/16/2014, 10:13 am
Re: Skin-on-Frame: urethane problem
Gerhardt Raven -- 9/21/2014, 1:11 am
Re: Skin-on-Frame: urethane problem *PIC*
Terry Reed -- 9/21/2014, 9:54 am
Re: Skin-on-Frame: Off track request
Marc Upchurch -- 9/21/2014, 12:16 pm
Re: Skin-on-Frame: Off track request
Terry Reed -- 9/21/2014, 2:45 pm