Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: CLC Shearwater 17 Build
By:Gero
Date: 9/19/2014, 12:00 am
In Response To: S&G: CLC Shearwater 17 Build (Gero)

In preparation for tomorrow's tacking of the hull and deck, I went out tonight and clipped the wires binding the deck to the hull and set the deck aside. I then went about making some brackets to get the hull straight and level. First bracket was made for the bow section and was screwed against the edge of my work table with a center screw, and once leveled, a screw was added to each side of the bracket to stabilize.

http://m5.i.pbase.com/g9/93/613693/2/157441925.9VefYvA9.jpg

I then made an adjustable bracket for the sawhorse holding up the stern, where each side could pivot, and once level, added a second screw per side. The bracket was then screwed into the saw horse to prevent it from moving.
http://m7.i.pbase.com/g9/93/613693/2/157441927.lDSzj1rn.jpg

I then sighted across two levels and made some minor adjustments.
http://m6.i.pbase.com/g9/93/613693/2/157441926.O9TpL8oZ.jpg

As mentioned, I'm hoping to get out and tack the hull and deck and then stitch them back together and will let that cure for 24 hours. time permitting, I'll fillet the hull and glass the cockpit tomorrow night. I'd then plan on doing the fillets on the deck on Sunday night so that I can glass the inside of the deck during the week and hopefully tack the hull and deck together next weekend. I also want to get started on a paddle with a maple shaft and maple/cherry/bubinga laminated blade before I get down to the varnish.

If anyone thinks I should wait an extra day for the hull/deck tacks, I'd appreciate hearing from you.

Gero

Messages In This Thread

S&G: CLC Shearwater 17 Build
Gero -- 9/15/2014, 10:17 pm
Re: S&G: CLC Shearwater 17 Build
JohnAbercrombie -- 9/15/2014, 10:26 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/15/2014, 10:31 pm
Re: S&G: CLC Shearwater 17 Build
John Messinger -- 9/16/2014, 8:04 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/17/2014, 1:22 pm
Re: S&G: CLC Shearwater 17 Build *PIC*
JohnAbercrombie -- 9/17/2014, 3:37 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/17/2014, 10:42 pm
Re: S&G: CLC Shearwater 17 Build
Niven Paine -- 9/18/2014, 2:01 am
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/17/2014, 10:40 pm
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/19/2014, 12:00 am
Re: S&G: CLC Shearwater 17 Build
Gero -- 9/19/2014, 12:02 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/20/2014, 12:24 am
Re: S&G: CLC Shearwater 17 Build
george jung -- 9/20/2014, 12:04 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/20/2014, 12:30 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/21/2014, 12:40 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/22/2014, 11:31 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/24/2014, 1:02 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 12:43 am
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/25/2014, 9:08 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 9:19 am
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/25/2014, 5:56 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/25/2014, 11:36 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/26/2014, 4:47 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 9/27/2014, 6:37 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/27/2014, 8:18 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 9/29/2014, 11:33 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/1/2014, 11:04 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/5/2014, 5:59 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/7/2014, 11:17 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/8/2014, 4:49 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/8/2014, 5:54 pm
Re: S&G: CLC Shearwater 17 Build
Yoshi -- 10/8/2014, 10:12 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/9/2014, 12:50 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/10/2014, 4:21 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/11/2014, 9:00 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/11/2014, 6:11 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/14/2014, 11:44 pm
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/26/2014, 10:35 pm
Re: S&G: CLC Shearwater 17 Build
Bill Hamm -- 10/27/2014, 12:29 am
Re: S&G: CLC Shearwater 17 Build
Gero Verheyen -- 10/27/2014, 7:39 am