Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: stripping near cockpit cutout - Guillim
By:aikijay
Date: 7/29/2014, 7:07 am

Thanks Howard. I did this on about 4 strips of my boat, using a scarf joint instead of a butt joint, but same idea. You can see the joint but they get lost in the overall impression of the bigger picture of the boat form. I tried to minimize them. You really can't use these joints however when there is substantial twist from one end of a strip to the other as the spring back makes the ends rotate out of alignment.

Messages In This Thread

Strip: stripping near cockpit cutout - Guillimot
aikijay -- 7/25/2014, 10:36 pm
Re: Strip: stripping near cockpit cutout - Guillim
Marc Upchurch -- 7/26/2014, 12:52 am
Re: Strip: stripping near cockpit cutout - Guillim
howard -- 7/26/2014, 1:53 am
Re: Strip: stripping near cockpit cutout - Guillim
Jay Stallman -- 7/26/2014, 7:15 am
Re: Strip: stripping near cockpit cutout - Guillim
howard -- 7/26/2014, 8:02 am
Re: Strip: stripping near cockpit cutout - Guillim
george jung -- 7/26/2014, 10:12 am
Re: Strip: stripping near cockpit cutout - Guillim
Justin -- 7/26/2014, 5:20 pm
Re: Strip: stripping near cockpit cutout - Guillim
aikijay -- 7/29/2014, 7:00 am
Re: Strip: stripping near cockpit cutout - Guillim
Justin -- 7/29/2014, 8:55 am
Re: Strip: stripping near cockpit cutout - Guillim
Jay Stallman -- 7/29/2014, 9:31 am
Re: Strip: stripping near cockpit cutout - Guillim
aikijay -- 7/29/2014, 7:04 am
Re: Strip: stripping near cockpit cutout - Guillim
aikijay -- 7/29/2014, 7:07 am
Re: Strip: stripping near cockpit cutout - Guillim
Phil -- 8/2/2014, 11:28 am
Re: Strip: stripping near cockpit cutout - Guillim
aikijay -- 8/2/2014, 5:07 pm
Re: Strip: stripping near cockpit cutout - Guillim
Bill Hamm -- 8/3/2014, 12:26 am
Re: Strip: stripping near cockpit cutout - Guillim
Justin -- 8/3/2014, 7:57 am