Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: S&G: Plywood Delamination Repair
In Response To: S&G: Plywood Delamination Repair (Craig Dempsey)
Your repair method sounds like it should work fine- the fiberglass will be wetted out with epoxy and then have a fill coat over?
Was your S&G fully glassed inside the hull/deck, or just taped at the seams? Have you figured out the cause of the delamination under the seat?
Messages In This Thread
- S&G: Plywood Delamination Repair
Craig Dempsey -- 7/11/2014, 1:13 pm- Re: S&G: Plywood Delamination Repair
JohnAbercrombie -- 7/11/2014, 2:55 pm- Re: S&G: Plywood Delamination Repair
Craig Dempsey -- 7/11/2014, 4:13 pm- Re: S&G: Plywood Delamination Repair
JohnAbercrombie -- 7/11/2014, 6:19 pm- Re: S&G: Plywood Delamination Repair
Bill Hamm -- 7/12/2014, 4:16 pm
- Re: S&G: Plywood Delamination Repair
- Re: S&G: Plywood Delamination Repair
- Re: S&G: Plywood Delamination Repair
- Re: S&G: Plywood Delamination Repair
