Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Cut off and re-glued tops of forms
By:JohnAbercrombie
Date: 5/22/2014, 10:50 am

Hi John,

Your sequence would work well with staples, but would it work if the hull is glued to the forms as is the case for this builder. How would you separate the hull and deck if both are still glued to the forms?

BEst regards,

Allan Edie


Allan-
You are absolutely correct; it wouldn't work if the strips are glued to the forms. Sorry.
Instead, as you said:
Glass outside of hull
Turn boat over and put in cradles.
Mark each form position as you indicated
Remove/loosen forms, etc.

I'm SO glad I don't mind nice rows of staple holes!
;-)

Messages In This Thread

Strip: Cut off and re-glued tops of forms
aikijay -- 5/20/2014, 7:25 am
Re: Strip: Cut off and re-glued tops of forms
JohnAbercrombie -- 5/20/2014, 11:34 am
Re: Strip: Cut off and re-glued tops of forms
aikijay -- 5/20/2014, 6:25 pm
Re: Strip: Cut off and re-glued tops of forms
JohnAbercrombie -- 5/20/2014, 7:10 pm
Re: Strip: Cut off and re-glued tops of forms
Kevin Greer -- 5/20/2014, 4:41 pm
Re: Strip: Cut off and re-glued tops of forms
aikijay -- 5/20/2014, 6:29 pm
Re: Strip: Cut off and re-glued tops of forms
Kevin Greer -- 5/20/2014, 8:09 pm
Re: Strip: Cut off and re-glued tops of forms
howard -- 5/21/2014, 12:30 am
Re: Strip: Cut off and re-glued tops of forms
aikijay -- 5/21/2014, 5:31 am
Re: Strip: Cut off and re-glued tops of forms
A. Edie -- 5/21/2014, 12:31 am
Re: Strip: Cut off and re-glued tops of forms
aikijay -- 5/21/2014, 5:56 am
Re: Strip: Cut off and re-glued tops of forms
A. Edie -- 5/21/2014, 12:34 pm
Re: Strip: Cut off and re-glued tops of forms *PIC*
JohnAbercrombie -- 5/21/2014, 1:51 pm
Re: Strip: Cut off and re-glued tops of forms
A. Edie -- 5/21/2014, 11:40 pm
Re: Strip: Cut off and re-glued tops of forms
JohnAbercrombie -- 5/22/2014, 10:50 am
Re: Strip: Cut off and re-glued tops of forms
A. Edie -- 5/22/2014, 11:42 am
Re: Strip: Cut off and re-glued tops of forms
Bill Hamm -- 5/23/2014, 4:37 pm
Re: Strip: Cut off and re-glued tops of forms
JohnAbercrombie -- 5/21/2014, 1:57 pm