Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Glass for Epoxy
By:Jay Babina
Date: 4/16/2014, 11:07 am
In Response To: Re: Other: Fiberglass seat layup (Bill Hamm)

I'm doing some research on the subject of glass and the "compatibly with epoxy" issue. Information is not easy to find and I have some responses back from glass cloth manufacturers. It seems that generally most cloth is compatible with epoxy and only some are polyester only. I very often bought cloth from boating stores and always had clear wet-outs. I will report my findings on a post once I get all the information back from my inquiries. I'm doing this because I heard these stories about epoxy compatibility but never really knew the in-depth story. I'm finding that many people who sell glass fabric don't really know either.

Messages In This Thread

Other: Fiberglass seat layup
Ralph Merriman -- 4/14/2014, 10:23 pm
Re: Other: Fiberglass seat layup *PIC*
Bob Ten Eyck -- 4/15/2014, 12:07 am
Re: Other: Fiberglass seat layup
Ralph Merriman -- 4/15/2014, 1:31 pm
Re: Other: Fiberglass seat layup
JohnAbercrombie -- 4/15/2014, 3:00 am
Re: Other: Fiberglass seat layup
Ralph Merriman -- 4/15/2014, 1:55 pm
Re: Other: Fiberglass seat layup
Jay Babina -- 4/15/2014, 8:06 am
Re: Other: Fiberglass seat layup
Bill Hamm -- 4/15/2014, 1:00 pm
roving for epoxy
Jay Babina -- 4/15/2014, 1:47 pm
Glass for Epoxy
Jay Babina -- 4/16/2014, 11:07 am
Re: Glass for Epoxy
Dan Caouette (CSCWC) -- 4/16/2014, 1:08 pm
Re: Glass for Epoxy
Bill Hamm -- 4/16/2014, 4:20 pm
Re: Other: Fiberglass seat layup
Brian Nystrom -- 4/18/2014, 7:01 am
Re: Other: Fiberglass seat layup
JohnAbercrombie -- 4/18/2014, 11:39 am
Re: sitting on that type of seat
Mike Bielski -- 4/18/2014, 8:59 am
Re: sitting on that type of seat
Ralph Merriman -- 4/18/2014, 11:27 am
Re: sitting on that type of seat
Mike Bielski -- 4/18/2014, 11:48 am
Re: sitting on that type of seat
scottbaxter -- 4/18/2014, 3:36 pm
Re: sitting on that type of seat
Mike Bielski -- 4/18/2014, 11:14 pm