Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: How about a different order of operations?
By:Rod Tait
Date: 3/31/2014, 4:43 pm
In Response To: Re: How about a different order of operations? (Jay Stallman)

Here are some pricing options based on Canadian $ ( not worth much compared to USD right now)

If all you wanted was 6 oz. glass everywhere, inside and out, the you could go with 17 yds. of 6 in. wide with a pricing of $8.65 for a total of 147.05. This piece will cover inside and out deck and hull, scraps for re-enforcing hatches, cockpit, and making seam tape. Or if you cut in half lengthwise, then only 6 yds. will do for total of $51.90. If you went with 38 inch wide for whole boat, then total would be 23 yds. at $6.95/yd. for total of $159.85. But remember that a wider cloth cut on a slight angle will drape over the boat better, especially the curved hull. The 60 inch cut in half lengthwise will not do this as well.

If you wanted to add second layer to outside hull, then purchase a piece of 4 oz. in 24 wide and you would only need maybe 5 yds.

If you were to go with only 4 oz., everywhere, inside and out , then 18 yds. of 50 inch wide will do the same as the 6 oz. by 60 inch. It is $8.10 per yd. for total of $145.80 as compared to 4 oz. by 30 inch wide for length of 23 yds. at a price of $5.40 for total of $124.20
keeping in mind the diagonal cut drapes better.

Or you go with only 6 oz. on the outside of the hull, then purchase 38 inch wide for 6 yds. at $42.30 plus maybe 17 yds. of 4 oz. at 30 inch wide to cover all the rest of the kayak for additional $91.80 or $134.10 total.

So you can see, there are many different combinations from $52 to $152 and I am sure others will add different options as this is only for standard weave E-glass.

Messages In This Thread

Strip: Order of Operations
aikijay -- 3/26/2014, 2:15 pm
Re: Strip: Order of Operations
Lomic -- 3/26/2014, 2:23 pm
Re: Strip: Order of Operations
John Messinger -- 3/26/2014, 3:02 pm
Re: Strip: Order of Operations
Jay Stallman -- 3/26/2014, 3:51 pm
Re: Strip: Order of Operations
John Messinger -- 3/26/2014, 3:59 pm
Re: Strip: Order of Operations
aikijay -- 3/26/2014, 5:16 pm
Re: Strip: Order of Operations
John Messinger -- 3/26/2014, 5:48 pm
Re: Strip: The Hot Glue Guru
Rob Macks/Laughing Loon CC&K -- 3/26/2014, 5:30 pm
Re: Strip: The Hot Glue Guru
aikijay -- 3/26/2014, 9:56 pm
Re: Strip: The Hot Glue Guru
Rob Macks/Laughing Loon CC&K -- 3/27/2014, 1:29 am
Re: Strip: The Hot Glue Guru
Lomic -- 3/27/2014, 3:20 am
Re: Strip: The Hot Glue Guru
aikijay -- 3/27/2014, 7:21 am
Re: Strip: The Hot Glue Guru
Rob Macks/Laughing Loon CC&K -- 3/27/2014, 8:29 am
Re: Strip: The Hot Glue Guru
Jay Babina -- 3/27/2014, 8:48 am
Re: Strip: The Hot Glue Guru
Dan Caouette (CSCWC) -- 3/27/2014, 9:17 am
Re: Strip: The Hot Glue Guru
Bill Hamm -- 3/28/2014, 8:33 am
Re: Strip: The Hot Glue Guru
Rob Macks/Laughing Loon CC&K -- 3/28/2014, 11:14 am
Old sayings...
Dan Caouette (CSCWC) -- 3/27/2014, 9:21 am
Re: Strip: The Hot Glue Guru
Rob Macks/Laughing Loon CC&K -- 4/1/2014, 6:20 pm
Re: Strip: The Hot Glue Guru
aikijay -- 4/1/2014, 9:33 pm
Re: Strip: The Hot Glue Guru
MattD. -- 3/27/2014, 9:53 am
Re: Strip: The Hot Glue Guru
Etienne Muller -- 3/27/2014, 3:03 pm
Re: Strip: Order of Operations
Rod Tait -- 3/27/2014, 10:56 am
Re: Strip: Order of Operations
Jay Stallman -- 3/27/2014, 12:47 pm
Re: Strip: Order of Operations
Rod Tait -- 3/27/2014, 12:57 pm
Re: Strip: Order of Operations
Jay Stallman -- 3/27/2014, 1:54 pm
Re: Strip: Order of Operations
Rob Macks/Laughing Loon CC&K -- 3/27/2014, 2:18 pm
Re: Strip: Order of Operations
Phil -- 4/5/2014, 10:40 am
Re: Strip: Order of Operations
Rob Macks/Laughing Loon CC&K -- 4/5/2014, 2:31 pm
Re: Strip: Order of Operations
Phil -- 4/5/2014, 3:16 pm
Re: Strip: Order of Operations
Rob Macks/Laughing Loon CC&K -- 4/5/2014, 4:13 pm
Re: Strip: Order of Operations
Bill Hamm -- 4/6/2014, 1:05 am
Re: Strip: Order of Operations *PIC*
Rob Macks/Laughing Loon CC&K -- 4/6/2014, 8:53 am
How about a different order of operations? *PIC*
Dan Caouette (CSCWC) -- 3/27/2014, 2:07 pm
Re: How about a different order of operations?
Jay Stallman -- 3/27/2014, 2:59 pm
Re: How about a different order of operations?
Dan Caouette (CSCWC) -- 3/27/2014, 3:16 pm
Re: How about a different order of operations?
Jay Stallman -- 3/27/2014, 10:58 pm
Re: How about a different order of operations?
Rod Tait -- 3/28/2014, 10:15 am
Re: How about a different order of operations?
Jay Stallman -- 3/30/2014, 8:49 am
Re: How about a different order of operations?
Rod Tait -- 3/30/2014, 12:23 pm
Re: How about a different order of operations?
george jung -- 3/30/2014, 1:17 pm
Re: How about a different order of operations?
JohnAbercrombie -- 3/30/2014, 1:47 pm
Re: How about a different order of operations?
Rod Tait -- 3/30/2014, 2:14 pm
Re: How about a different order of operations?
Jay Stallman -- 3/30/2014, 2:47 pm
Re: How about a different order of operations?
JohnAbercrombie -- 3/30/2014, 3:00 pm
Re: How about a different order of operations?
Bill Hamm -- 3/31/2014, 12:35 am
Re: How about a different order of operations?
Bill Hamm -- 3/31/2014, 12:34 am
Re: How about a different order of operations?
Jay Stallman -- 3/30/2014, 4:08 pm
Re: How about a different order of operations?
JohnAbercrombie -- 3/30/2014, 7:31 pm
Re: How about a different order of operations?
ancient kayaker -- 3/30/2014, 8:59 pm
Re: How about a different order of operations?
aikijay -- 3/30/2014, 10:59 pm
Re: How about a different order of operations?
JohnAbercrombie -- 3/30/2014, 11:30 pm
Re: How about a different order of operations?
Jay Stallman -- 3/30/2014, 11:57 pm
Re: How about a different order of operations?
ancient kayaker -- 3/31/2014, 12:49 am
Re: How about a different order of operations?
Bill Hamm -- 3/31/2014, 1:07 am
Re: How about a different order of operations?
Jay Stallman -- 3/31/2014, 8:09 am
Re: How about a different order of operations? *PIC*
JohnAbercrombie -- 3/31/2014, 12:56 pm
Re: How about a different order of operations?
Bill Hamm -- 4/1/2014, 12:55 am
Re: How about a different order of operations?
Jay Stallman -- 3/31/2014, 9:05 am
Re: How about a different order of operations? *PIC*
Dan Caouette (CSCWC) -- 3/31/2014, 10:11 am
Re: How about a different order of operations?
Jay Stallman -- 3/31/2014, 12:40 pm
Re: How about a different order of operations?
JohnAbercrombie -- 3/31/2014, 1:12 pm
End Pours
Dan Caouette (CSCWC) -- 3/31/2014, 1:22 pm
Re: End Pours
Jay Stallman -- 3/31/2014, 2:20 pm
Re: End Pours
JohnAbercrombie -- 3/31/2014, 2:32 pm
Re: End Pours
Dan Caouette (CSCWC) -- 3/31/2014, 2:35 pm
Re: End Pours
Jay Stallman -- 3/31/2014, 4:23 pm
Re: End Pours
Bill Hamm -- 4/1/2014, 1:05 am
Re: End Pours
Dan -- 4/1/2014, 10:19 am
Re: End Pours
Jay Stallman -- 4/1/2014, 10:43 am
Microballoons
John Messinger -- 4/1/2014, 11:48 am
Re: Microballoons
Jay Stallman -- 4/1/2014, 1:51 pm
Re: Microballoons
Dan -- 4/1/2014, 4:20 pm
Re: End Pours *PIC*
Nick Schade - Guillemot Kayaks -- 3/31/2014, 5:55 pm
Re: End Pours *PIC*
Shawn Jones -- 4/1/2014, 2:24 am
Re: End Pours
Bill Hamm -- 4/1/2014, 1:01 am
Re: End Pours
Dan Caouette (CSCWC) -- 4/1/2014, 8:46 am
Re: How about a different order of operations?
aikijay -- 3/30/2014, 11:21 pm
Re: How about a different order of operations?
Rod Tait -- 3/31/2014, 10:44 am
Re: How about a different order of operations?
Jay Stallman -- 3/31/2014, 12:47 pm
Re: How about a different order of operations?
Rod Tait -- 3/31/2014, 4:43 pm
Re: How about a different order of operations?
george jung -- 4/1/2014, 7:50 pm
Re: How about a different order of operations?
Bill Hamm -- 3/28/2014, 8:41 am
Re: How about a different order of operations?
george jung -- 3/28/2014, 11:12 pm
Re: How about a different order of operations? *PIC*
Dan Caouette (CSCWC) -- 3/29/2014, 6:16 am
Re: How about a different order of operations?
george jung -- 3/29/2014, 10:17 am
Re: How about a different order of operations?
Rod Tait -- 3/29/2014, 11:17 am
Re: How about a different order of operations? *PIC*
Dan Caouette (CSCWC) -- 3/29/2014, 3:43 pm
Re: How about a different order of operations?
Rod Tait -- 3/27/2014, 3:20 pm