Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: epoxy under stitches
By:Etienne Muller
Date: 5/13/2013, 5:31 am
In Response To: S&G: epoxy under stitches *PIC* (Jennifer Harold)

Hi Jennifer. It's great to have another lady on the forum. Helps keep us civilised.

The quickest method is probably a sharp chisel. Don't push it by hand. Just tap, tap, tap it lightly with a hammer.

With your next S & G, don't fill in right up to or under the wire, just between them, then pull out the wires and fill in the gaps where the wires were.

Et

Messages In This Thread

S&G: epoxy under stitches *PIC*
Jennifer Harold -- 5/12/2013, 10:06 pm
Re: S&G: epoxy under stitches
Matt Jakubek -- 5/12/2013, 10:37 pm
Re: S&G: epoxy under stitches
Marc Upchurch -- 5/12/2013, 11:05 pm
Re: S&G: epoxy under stitches
JohnAbercrombie -- 5/13/2013, 12:34 pm
Re: S&G: epoxy under stitches
Etienne Muller -- 5/13/2013, 5:31 am
Re: S&G: epoxy under stitches
SCOTT FITZGERRELL -- 5/13/2013, 6:30 pm
Re: S&G: epoxy under stitches
Jennifer Harold -- 5/15/2013, 10:09 pm
Re: S&G: epoxy under stitches
Robert N Pruden -- 5/14/2013, 4:11 am