Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Easy Keel rub strip
By:Ken Blanton
Date: 7/30/2012, 8:30 pm
In Response To: Re: Material: Easy Keel rub strip (awoodman)

Slick Strips are for reducing friction ... I use it on my table saw. I think the stuff would be worth zip as a rub strip.

On an SOF most folks use GFlex or a filled epoxy. If I ever put a full length rub strip on my SOF I'd use a filled epoxy ... 'cause I have lots of epoxy and fillers layin' around.

Ken Blanton

: I wonder how this would work on a SOF hull?
: I found this also...
:
: http://www.eplastics.com/Plastic/Slick_Strips/SLICKSTRIP0-030X1-000X50FT

Messages In This Thread

Material: Easy Keel rub strip *PIC*
Etienne Muller -- 7/30/2012, 3:09 pm
Re: Material: Easy Keel rub strip *PIC*
Etienne Muller -- 7/30/2012, 3:13 pm
Re: Material: Easy Keel rub strip *PIC*
Etienne Muller -- 7/30/2012, 3:15 pm
Re: Material: Easy Keel rub strip *PIC*
Etienne Muller -- 7/30/2012, 3:16 pm
Re: Material: Easy Keel rub strip
Kirk Fredericks -- 7/30/2012, 4:48 pm
Re: Material: Easy Keel rub strip
Etienne Muller -- 7/30/2012, 5:59 pm
Re: Material: Easy Keel rub strip
awoodman -- 7/30/2012, 7:03 pm
Re: Material: Easy Keel rub strip
Ken Blanton -- 7/30/2012, 8:30 pm
Re: Material: Easy Keel rub strip
Brian Hanks -- 7/30/2012, 9:13 pm
Re: Material: Easy Keel rub strip
Ken Blanton -- 7/30/2012, 10:23 pm
Re: Material: Easy Keel rub strip
Brian Hanks -- 8/1/2012, 9:22 pm
Re: Material: Easy Keel rub strip
Ken Blanton -- 8/2/2012, 4:28 am
Re: Material: Easy Keel rub strip
Noel Bennett -- 8/2/2012, 8:13 am
Re: Material: Easy Keel rub strip
dave g -- 7/30/2012, 10:29 pm
Re: Material: Easy Keel rub strip
ancient kayaker -- 7/31/2012, 6:42 pm
Re: Material: Easy Keel rub strip
Dan Caouette -- 7/30/2012, 8:17 pm
Re: Material: Easy Keel rub strip
Marc Upchurch -- 7/30/2012, 9:16 pm
Re: Material: Easy Keel rub strip
Etienne Muller -- 7/31/2012, 4:11 am
Re: Material: Easy Keel rub strip
Kirk Fredericks -- 7/31/2012, 8:19 pm