Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Can We Talk About Table Saws??
By:Etienne Muller
Date: 6/18/2012, 3:04 pm
In Response To: Tools: Can We Talk About Table Saws?? *PIC* (Kurt Maurer)

Hi Kurt, I am a big fan of yours, as you probably know. The table saw I use is a very nice heavy ten inch delta knockoff from Korea or somewhere, the only thing I don't like about it is the fact that the riving knife carries the blade guard. The reason this is less than perfect is that you can't cut slots without removing the knife, which is a bit of a drag, and the setup precludes the use of a zero clearance slot. the knife is too wide to use with my narrow 1.3mm kerf CMT cedar ripping blade anyway.

It is a small blade so only good for up to an inch and a quarter or so, but perfect for ripping strips.

I use the same Setup as in your pic, except that I have a plastic plug socket outlet clamped to the guide rail over the saw blade location with two spring clamps. It is just a reminder that the danger point is approaching.

A picture tomorrow maybe.

The problem with imperfect safety attachments is that they get removed for certain jobs and then often don't get put back on.

Et

Messages In This Thread

Tools: Can We Talk About Table Saws?? *PIC*
Kurt Maurer -- 6/18/2012, 1:47 pm
Re: Tools: Can We Talk About Table Saws??
Jay Babina -- 6/18/2012, 2:12 pm
Re: Tools: Can We Talk About Table Saws??
Bill Hamm -- 6/19/2012, 2:02 am
Re: Tools: Can We Talk About Table Saws??
Mike Bielski -- 6/18/2012, 2:15 pm
Re: Tools: Can We Talk About Table Saws??
Rod Tait (Orca Boats) -- 6/18/2012, 2:26 pm
Re: Tools: Can We Talk About Table Saws??
Etienne Muller -- 6/18/2012, 3:04 pm
Re: Tools: Can We Talk About Table Saws??
John Messinger -- 6/18/2012, 3:16 pm
Re: Tools: Can We Talk About Table Saws??
Deano -- 6/18/2012, 4:18 pm
Re: Tools: Can We Talk About Table Saws??
Mike Bielski -- 6/18/2012, 5:06 pm
Re: Tools: Can We Talk About Table Saws??
Etienne Muller -- 6/18/2012, 6:43 pm
Re: Tools: Can We Talk About Table Saws??
Marc Upchurch -- 6/18/2012, 9:55 pm
Re: Tools: Can We Talk About Table Saws??
Etienne Muller -- 6/19/2012, 3:27 am
Re: Tools: Can We Talk About Table Saws??
John Messinger -- 6/19/2012, 8:08 am
Re: Tools: Can We Talk About Table Saws??
Marc Upchurch -- 6/19/2012, 5:27 pm
Re: Tools: Can We Talk About Table Saws??
Mike Bielski -- 6/18/2012, 11:33 pm
Re: Tools: Can We Talk About Table Saws??
Marc Upchurch -- 6/18/2012, 5:19 pm
Re: Tools: Can We Talk About Table Saws??
Kurt Maurer -- 6/18/2012, 8:00 pm
Re: Tools: Can We Talk About Table Saws??
Jeff Horton -- 6/18/2012, 10:41 pm
Re: Tools: Can We Talk About Table Saws??
Allan -- 6/19/2012, 12:50 am
Re: Tools: Can We Talk About Table Saws??
Bill Hamm -- 6/19/2012, 1:33 am
Re: Tools: Can We Talk About Table Saws??
William Mayberry -- 6/18/2012, 9:51 pm
Re: Tools: Can We Talk About Table Saws??
danperry -- 6/18/2012, 10:44 pm
Re: Tools: Can We Talk About Table Saws??
danperry -- 6/18/2012, 11:06 pm
Re: Tools: Can We Talk About Table Saws??
Rob Macks/Laughing Loon CC&K -- 6/19/2012, 7:41 am
Re: Tools: Can We Talk About Table Saws?? *PIC*
Jeff Horton -- 6/19/2012, 12:47 pm
Thanks! Just made one for my saw
Rob Macks/Laughing Loon CC&K -- 6/21/2012, 11:08 am
Experience and Safety
Nick Schade - Guillemot Kayaks -- 6/19/2012, 9:20 am
Re: Experience and Safety
Al Edie -- 6/19/2012, 11:46 am
Re: Experience and Safety
Stephen Troy -- 6/19/2012, 2:45 pm
Re: Tools: Can We Talk About Table Saws??
Malcolm Schweizer -- 6/18/2012, 11:21 pm
Re: Tools: Can We Talk About Table Saws??
Bryan K -- 6/19/2012, 11:07 am
Do you mean "riving knife" or "splitter"?
Brian Nystrom -- 6/20/2012, 7:16 am
Here's a video that explains it
Brian Nystrom -- 6/20/2012, 7:19 am
Re: Do you mean "riving knife" or "splitter"?
John Abercrombie -- 6/20/2012, 2:41 pm
Re: Do you mean "riving knife" or "splitter"?
Brian Nystrom -- 6/21/2012, 6:56 am
Re: Tools: Can We Talk About Table Saws??
Rob Macks/Laughing Loon CC&K -- 6/20/2012, 8:40 am
Re: Tools: Can We Talk About Table Saws??
Mike M -- 6/20/2012, 8:46 am
Re: Tools: Can We Talk About Table Saws??
Will N 2 Go -- 6/21/2012, 12:44 am
Re: Tools: Can We Talk About Table Saws??
Scott Fitzgerrell -- 6/21/2012, 2:44 pm