Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: flush deck fittings
By:John Abercrombie
Date: 5/30/2012, 9:04 pm
In Response To: Re: Strip: flush deck fittings (george jung)

: :
: :

: I'm curious - for those of you who are glassing the underside of
: the deck, but not the outer surface until after you've glued the
: halves together - are you cutting out the hatches, and moulding
: a hatch lip in the usual fashion, before the halves are joined?
: I see no other way to do this - but wonder about 'durability' of
: the deck having only the inside glassed.

I'm interested in the answer to this question as well..
I generally try to get epoxy (and glass) on both sides of the wood core fairly promptly.
My shop is far, far from 'climate controlled' and changing humidity can cause quite a bit of distortion in panels with glass on one side only.
(You can guess how I found this out!)

Messages In This Thread

Strip: flush deck fittings
Andrew T -- 5/29/2012, 1:25 pm
Re: Strip: flush deck fittings
Malcolm Schweizer -- 5/29/2012, 2:03 pm
Re: Strip: flush deck fittings
Marc Upchurch -- 5/29/2012, 8:28 pm
Re: Strip: flush deck fittings
John Abercrombie -- 5/29/2012, 11:56 pm
Re: Strip: flush deck fittings
george jung -- 5/30/2012, 7:05 pm
Re: Strip: flush deck fittings
John Abercrombie -- 5/30/2012, 9:04 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 3:56 am
Re: Strip: flush deck fittings
Etienne Muller -- 5/31/2012, 4:00 am
Re: Strip: flush deck fittings
Erik J -- 5/31/2012, 1:34 am
Re: Strip: flush deck fittings
george jung -- 5/31/2012, 8:57 am
Re: Strip: flush deck fittings
Sean Dawe -- 5/31/2012, 9:18 am
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:10 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:14 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:19 pm
Re: Strip: flush deck fittings
Sean Dawe -- 5/31/2012, 2:25 pm
Re: Strip: flush deck fittings
Etienne Muller -- 5/31/2012, 2:29 pm
Re: Strip: flush deck fittings
Mike M -- 6/1/2012, 9:19 am
Re: Strip: flush deck fittings
Etienne Muller -- 6/1/2012, 4:08 pm
Re: Strip: flush deck fittings
Mike M -- 6/2/2012, 11:03 am
Re: Strip: flush deck fittings
Will N 2Go -- 5/31/2012, 10:06 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/29/2012, 3:00 pm
Re: Strip: flush deck fittings *NM* *PIC*
Etienne Muller -- 5/29/2012, 3:01 pm
Re: Strip: flush deck fittings *NM* *PIC*
Etienne Muller -- 5/29/2012, 3:03 pm
Re: Strip: flush deck fittings
Paul Davies -- 5/29/2012, 7:08 pm
Re: Strip: flush deck fittings
Etienne Muller -- 5/30/2012, 6:24 am
Re: Strip: flush deck fittings
Paul Davies -- 5/30/2012, 2:01 pm
tubing and back blocks
William Mayberry -- 5/30/2012, 8:53 am
Re: tubing and back blocks
Etienne Muller -- 5/30/2012, 9:09 am
Re: tubing and back blocks
William Mayberry -- 5/30/2012, 1:05 pm
Re: tubing and back blocks *PIC*
Etienne Muller -- 5/30/2012, 1:23 pm
Re: tubing and back blocks
Randy Echtinaw -- 6/1/2012, 2:45 pm
Re: tubing and back blocks *PIC*
Etienne Muller -- 6/1/2012, 4:45 pm
Re: Strip: flush deck fittings
Ian Cummins -- 5/29/2012, 7:34 pm
Re: Strip: flush deck fittings
Sean Dawe -- 5/29/2012, 7:39 pm
Re: Strip: flush deck fittings
Al Edie -- 5/30/2012, 12:00 am
Re: Strip: flush deck fittings *PIC*
Sean Dawe -- 5/30/2012, 7:43 am
Re: Strip: flush deck fittings
Mike M -- 5/30/2012, 9:38 am
Re: Strip: flush deck fittings
Etienne Muller -- 5/30/2012, 9:42 am
Re: Strip: flush deck fittings
Al Edie -- 5/30/2012, 10:43 am
Re: Strip: flush deck fittings
Mike M -- 5/30/2012, 12:19 pm
Re: Strip: flush deck fittings *PIC*
Sean Dawe -- 5/30/2012, 1:10 pm
Re: Strip: flush deck fittings
Ric Moodie -- 5/30/2012, 1:53 pm
Re: Strip: flush deck fittings
Dan Caouette -- 5/30/2012, 9:59 pm
Re: Strip: flush deck fittings *PIC*
Andrew T -- 6/1/2012, 6:17 pm
Re: Strip: flush deck fittings *PIC*
Andrew T -- 6/1/2012, 6:19 pm
Re: Strip: flush deck fittings
Ric Moodie -- 6/1/2012, 8:16 pm
Re: Strip: flush deck fittings
Mike Savage -- 6/2/2012, 7:43 am